Towertalk
[Top] [All Lists]

[Towertalk] Buying nuts and bolts - Rationalized gouging

To: <towertalk@contesting.com>
Subject: [Towertalk] Buying nuts and bolts - Rationalized gouging
From: W4EF@dellroy.com (Mike)
Date: Thu, 25 Apr 2002 07:57:27 -0700
I don't see what the big deal is with respect to handling charges. As long
as
a vendor lets you know up front that they are tacking on a handling charge,
then you have the option to go somewhere else. I use several vendors that
have minimum charges. When dealing with them, I make sure my orders are
big enough to meet the minimum. Also, it is also very common for vendors
to provide price breaks for larger quanities of a particular. This is
another
way of factoring in handling overhead.

73 de Mike,
W4EF....................................................................

----- Original Message -----
From: <K7LXC@aol.com>
To: <kq2m@mags.net>; <towertalk@contesting.com>
Sent: Thursday, April 25, 2002 6:37 AM
Subject: Re: [Towertalk] Buying nuts and bolts - Rationalized gouging


> In a message dated 4/24/02 4:12:42 PM Pacific Daylight Time, kq2m@mags.net
> writes:
>
> > Whatever happened to the concept that you build your "costs" into the
price?
>
>     The original post had to do with the fact that a part that cost 57
cents
> was ordered. So what would the price be by building in your "costs"?
>
> Cheers,
> Steve     K7LXC
> Champion Radio Products
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>




<Prev in Thread] Current Thread [Next in Thread>