I use an outdoor electrical entrance piece. I don't remember what it is
called but it is two pieces - one PVC pipe like about 5" long, the second is
a cap that goes over the pipe that makes the entrance a right angle. It is
about 3" in diameter so it is big enough for multiple coax/rotor runs. I
just stuffed a rag in it on the inside to keep the weather/critters out.
Another option is RadioShack's wall-feed-thru tube (plastic tube with
bushings on the end) that is big enough for RG-8 and a roter cable.
Barry KW8W
----- Original Message -----
From: "WL7M" <joe@xyz.net>
To: <towertalk@contesting.com>
Sent: Thursday, April 25, 2002 6:59 PM
Subject: [Towertalk] Feeding RG-8 Through Walls
> Any tips on feed through techniques for running some RG-8 through
> walls? My brother is new at this ham business (KO7DX - Bellingham, WA)
and
> has been having problems. If you can provide a reference, I'd love to
send
> it to him. Trying to illustrate this from 1500 miles away here in Alaska
> is a tad difficult.
>
> 73,
> Joe
> WL7M
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|