[Towertalk] Cutting Plate?

To:	<towertalk@contesting.com>
Subject:	[Towertalk] Cutting Plate?
From:	swca@swbell.net (Mark Beckwith)
Date:	Sun, 21 Jul 2002 14:56:31 -0500

I just read what I wrote:

> Hi Mike,
>
> I used to buy my material at a place called "Industrial Metals" when I
lived
> in California and was building bug stuff for people.

Vibroplex had nothing on me.  I built some really big bugs.

Mark, N5OT

<Prev in Thread]	Current Thread	[Next in Thread>
[Towertalk] Cutting Plate?, Mike Wetzel [Towertalk] Cutting Plate?, dan hearn [Towertalk] Cutting Plate?, Chris BONDE [Towertalk] Cutting Plate?, Kevin Stover [Towertalk] Cutting Plate?, Tom Rauch [Towertalk] Cutting Plate?, Mark Beckwith [Towertalk] Cutting Plate?, Mark Beckwith <= [Towertalk] Cutting Plate?, Robert Chudek K0RC [Towertalk] Cutting Plate?, Chuck O'Neal [Towertalk] Cutting Plate?, Chris BONDE [Towertalk] Cutting Plate?, Mark Beckwith [Towertalk] Cutting Plate?, W0UN--John Brosnahan [Towertalk] Cutting Plate?, Mike Wetzel [Towertalk] Cutting Plate?, Chris BONDE [Towertalk] Cutting Plate?, Richarde M. Gillingham [Towertalk] Cutting Plate?, Chris BONDE [Towertalk] Cutting Plate?, Tom Rauch

Previous by Date:	[Towertalk] Alliance rotor HD-73, Georgek5kg@aol.com
Next by Date:	[Towertalk] Hy-Gain HG-54HD crankup tower cable and TH6DXX problems, ditzian@alltel.net
Previous by Thread:	[Towertalk] Cutting Plate?, Mark Beckwith
Next by Thread:	[Towertalk] Cutting Plate?, Robert Chudek K0RC
Indexes:	[Date] [Thread] [Top] [All Lists]