I use a table saw with a carbide tipped blade to cut up to 1/2" thick
Al plate.
Chuck...K1KW
-----Original Message-----
From: Mike Wetzel <mjwetzel@comcast.net>
To: Towertalk <Towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Saturday, July 20, 2002 10:32 PM
Subject: [Towertalk] Cutting Plate?
Thanks for all the past help, one last question.
My sawzall type saw quit working on me a few months ago (burned up the
rotor, not replaceable) and I want to invest in a saw that can cut 3/8" x 8"
aluminum plate. In the past the sawzall evidentially got me through it,
albeit not the best (kind of wore through it). I have a small 3" x 6"
cutoff saw but this cannot (no matter how you rig it) cut the 3/8" x 8"
plate. Kind of hard to justify spending $500 or more on something but does
anyone know any other saw that might do the job? I've looked at cheap band
saws at Menard's, Lowe's and Homedepot and I doubt if they will do it even
with a fine pitched blade. Any suggestions?
Mike W9RE
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5
percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|