....a lot of us use copper tubing slid over reinforcing steel (rebar) as
grounding rods...the thickness of the copper is much great than the
plate on a commercial ground rod - and of course, it is a lot cheaper!
I also use a plumbing compression fitting for home-brew TV hardline
connector fabrication...
Think this the type of thing we used to see in "Hints & Kinks" in QST,
once upon a time in a former lifetime of our hobby!
K4OJ
FireBrick wrote:
>
> > -- by making it into thin/wide strap (or hollow tube) instead of a filled
> > circular cross-section, keeping the same amount of copper per foot. That
> > minimizes the inductance. (Yes, that amounts to the skin effect
> argument -
> > placing all the copper near the surface of the conductor.)
> >
>
> are you saying that the small coil of 1/2" copper tubing hanging in my
> garage would be a better grounding conductor that my heavy gauge solid
> wire.?
> (I can never remember if the soft copper tube used for water is K or M. I
> think M).
> I think it's 1/2"OD.
>
> I could easily flatten one end for clamping to ground rods.
>
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
> additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|