Snip
Yuri Said:
> It turned out that the problem with Stackmatch was that it keeps all three
> coax feedlines to verticals connected by their shields and that seems to
throw
> off the phasing. (Coaxes are used as stubs to switch vertical into
reflector
> mode.) You need to disconnect the shields together with center conductors
and
> leave them floating. Then the array shows signs of F/B and decent pattern.
>
> Not sure if it applies to your arrangement, but you might want to look
into
> it.
I wonder if this was the issue with my 3 stack of TH6s not work well with my
WX0B stack match?
Perhaps it's not a problem with Yagis?
73
Jim W7RY
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|