TT's:
I start building one of the 2 quads that will remplace my monobands 10-15-20m,
i still thinking how to support in the spreaders the wires in the driven
element , this one is the most inportant for me, i want to support the wires
with out make holes in the spreader, increase electrical length with metal
clamps or wires to attach in a strong way the wires , and can resist power
around legal limit (most important) or more when the swr increase in the band
limits or during a contest running power
i will apreciate an advice, followin this 4 parameters :
no holes in spreader , not metallic , hi power resistan and small weight.
just for the driver or if this is practical i will add to all the other
elements.
i was thinking in delrin insulators like the ones used in 2m yagis, but i have
no idea how much power can handle , glued with resin to the driver .
tnx in advance
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|