Towertalk
[Top] [All Lists]

Re: [TowerTalk] Proper bolt sizes for Rohn 25G

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Proper bolt sizes for Rohn 25G
From: kb9cry@comcast.net
Date: Wed, 19 Jan 2005 14:44:39 +0000
List-post: <mailto:towertalk@contesting.com>
And, another source is Hill Radio in Illinois.  Check out their prices also.

http://www.hillradio.net/

-------------- Original message -------------- 

> Chris: 
> 
> In the past I have always bought mine from Texas Towers. Gerald is 
> always helpful at TT. The last time I bought them he had them 
> prepackaged with enough bolts and nuts for one section in each tube. 
> 
> Tom, WW5L 
> 
> 
> 
> chris wrote: 
> > I took down my tower a few years back and discarded the old, rusted 
> > bolts. I cannot find a listing of the sizes for the bolts for the legs 
> > and the house bracket. All the Rohn literature I have does not cover 
> > the fasteners by tower size. 
> > 
> > I certainly would appreciate it, if someone could post the sizes for the 
> > leg sections or point me to somewhere to find them. 
> > 
> > Thanks, 
> 
> 
> 
> _______________________________________________ 
> 
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless 
> Weather 
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions 
> and ask for Sherman, W2FLA. 
> 
> _______________________________________________ 
> TowerTalk mailing list 
> TowerTalk@contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>