Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR

To: garyejones@cmaaccess.com
Subject: Re: [TowerTalk] SteppIR
From: Gary Schafer <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Tue, 22 Mar 2005 12:50:44 -0500
List-post: <mailto:towertalk@contesting.com>
Collins radio had some pretty good success with their tape wound motor 
driven antenna tuners.

73
Gary  K4FMX

garyejones@cmaaccess.com wrote:
> The real issue here, in my mind, (outside of the OM that lives on a
> saltwater island and had to replace his aluminum every year or two) is
> how long will the SteppIR elements hold up and how long the motor
> drives (the mechanics) will continue to accurately move the copper
> strips out and back. I wouldn't touch one until I heard how these
> elements are doing after five years vibrating 20 Hz in the wind,
> bending under ice loads, taking the blistering southern summers, and a
> couple of thousand changes of length.  My hunch is that there will not
> be a single antenna working at 5 or 10 years, while there are many 30
> year old aluminum monobanders still "playing" like the day there were
> first erected......
> 
>            73
> 
>                      Gary       W5FI
> 
> 
> _______________________________________________
> 
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
> questions and ask for Sherman, W2FLA.
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 
> 



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>