I would like to get/make an anti-climb device for my tower. It is a 70'
motorized crank-up/pull-down tower by Tashjian Towers. I won't be able
to clamp anything around the legs because of the moving contact points
between the tower sections. In addition, the motor, gear box, and cable
drum protrude at the bottom. I was thinking that a sheet metal shield
starting above the level of the motor, bear box, and drum might work,
but am unsure how it could be attached without interfering with the
moving parts of the tower. A fence around the tower is out of the
question for aesthetic reasons, therefore my only option is to fence in
the back yard. Does anyone figured out how to make an anti-climb device
for such a tower?
Craig, AE7I
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|