Thank you, Steve.
That is exactly what I wanted to learn.
73
Tom K4RV
----- Original Message -----
From: "Steve Maki" <steve@oakcom.com>
To: "towertalk" <towertalk@contesting.com>
Sent: Friday, April 15, 2005 15:39
Subject: Re: [TowerTalk] Andrew Commscope
> > Are the hardline connectors of Andrew and Commscope interchangable? For
> > instance, will a 7/8" Commscope connector fit 7/8" Andrew LDF-5, etc. ?
> >
> > Thanks / 73
> > Tom K4RV
>
> No. Commscope cable is smooth, while Andrew is corrugated. Completely
> different animals. As a matter of fact, there was a change in Commscope
> 50 ohm product a while back, which means there is two series of
> Commscope coax and connectors - not interchangeable.
>
> Steve K8LX
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.11 - Release Date: 4/14/2005
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|