Towertalk
[Top] [All Lists]

[TowerTalk] Crip connectors

To: <TowerTalk@contesting.com>
Subject: [TowerTalk] Crip connectors
From: "Gene WØQFC " <erastber@tampabay.rr.com>
Date: Fri, 29 Apr 2005 12:36:45 -0400 (Eastern Daylight Time)
List-post: <mailto:towertalk@contesting.com>
I bit the bullet and bought a new crimp tool (RFA-4005), connectors
(RFU-5Ø8-X and coax (#116) from The Wireman.
The only experience I have had with crimp-on's is with TV coax and spade
lugs, so I need some help with these connectors for the mini 8 coax.
I have a stripper that you can set for RG6, 58 and 59, so I use the setting
for 59 which is close to the mini 8. 
The problem I have is after pushing the connector on the coax it expands the
shield/outer jacket to a point that it is almost impossible to slide the
round crimp sleeve all the way on the connector. It looks as though either
the coax is too big or the sleeve is too small (or, I am doing something
wrong!).
Has anyone else had this problem, or is it just me doing something wrong?
Thanks in advance for your help.
 
Gene, WØQFC
 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>