What is "mini 8?" Is it another name for RG8X? If you bought all from the
same vendor, your best bet is likely to contact them.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Gene WØQFC
Sent: Friday, April 29, 2005 11:37 AM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Crip connectors
I bit the bullet and bought a new crimp tool (RFA-4005), connectors
(RFU-5Ø8-X and coax (#116) from The Wireman.
The only experience I have had with crimp-on's is with TV coax and spade
lugs, so I need some help with these connectors for the mini 8 coax.
I have a stripper that you can set for RG6, 58 and 59, so I use the setting
for 59 which is close to the mini 8.
The problem I have is after pushing the connector on the coax it expands the
shield/outer jacket to a point that it is almost impossible to slide the
round crimp sleeve all the way on the connector. It looks as though either
the coax is too big or the sleeve is too small (or, I am doing something
wrong!).
Has anyone else had this problem, or is it just me doing something wrong?
Thanks in advance for your help.
Gene, WØQFC
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|