Yeah, let's not forget we're talking about VERY slow rotation speeds. For
that matter, my Rohn 25 pointy top has been working just fine for 9 years
with a galvanized-to-galvanized "bearing" (my mast rides inside the tube
with no other bearing).
73, Pete N4ZR
At 04:11 PM 7/30/2005, Alan NV8A (ex. AB2OS) wrote:
>The bearings that AN Wireless sells for its towers have grease fittings
>too -- but I'd wager that they'll not need another shot of grease for a
>good few years after installation.
>
>73
>
>Alan NV8A
>
>
>On 07/30/05 09:20 am Barry Fox tossed the following ingredients into the
>ever-growing pot of cybersoup:
>
> > Notice the grease fittings? This is not a
> > "no lube / lifetime greased / etc" bearing,
> > someone is going to have to climb the tower
> > periodically with a grease gun. That might
> > be a point against using it. BOTOH, it sure
> > is cheap!
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|