Towertalk
[Top] [All Lists]

Re: [TowerTalk] Washers or No Washers

To: "Towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Washers or No Washers
From: "Tom Osborne" <w7why@verizon.net>
Date: Sat, 27 Aug 2005 08:19:11 -0700
List-post: <mailto:towertalk@contesting.com>
HI Wayne

I don't know about flat washers, but split washers can rust and fall out 
after a while and that will cause slack in a nut and bolt.  I used to work 
on heavy equipment and we found that problem, so SOP was NOT to use split 
washers.  73
Tom W7WHY


___________________________________________
Is there a reason why washers are not specified?  All comments and thoughts 
welcomed.

Wayne, WØZW
San Patricio, NM

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>