Towertalk
[Top] [All Lists]

Re: [TowerTalk] 4 awg copper wire and Amp locks

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] 4 awg copper wire and Amp locks
From: "Robert Chudek - K0RC" <k0rc@citlink.net>
Reply-to: Robert Chudek - K0RC <k0rc@pclink.com>
Date: Mon, 10 Jul 2006 21:38:15 -0500
List-post: <mailto:towertalk@contesting.com>
Well we might as well shut down this Tower Talk reflector for as much good as 
it's doing... I can't believe after weeks of discussions regarding proper 
ground system bonding, this post has been made... The picture shows two 
violations... #1) a stranded ground wire and #2) a non exothermic connection.

73 de Bob - K0RC



Message: 1
Date: Mon, 10 Jul 2006 12:08:24 -0400
From: Craig Clark <jcclark@wildblue.net>
Subject: [TowerTalk] 4 awg copper wire and Amp locks
To: towertalk@contesting.com
Message-ID: <7.0.1.0.2.20060710115911.03c222a8@wildblue.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

Copper wire has gone through the roof!

I was selling 25' of #4 AWG 7 strand stranded copper wire for $12.50.

New price for 25' is $37.25

Amp's Cloks are very good for clamping a #4 wire to a ground rod

http://www.radio-ware.com/products/gckit25.htm



73, Craig Clark, K1QX

PLEASE NOTE NEW EMAIL ADDRESS
JCCLARK@WILDBLUE.NET

RADIOWARE AND RADIO BOOKSTORE
PO  BOX 209
RINDGE NH 03461
603 899 6957
WWW.RADIO-WARE.COM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>