Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 55 thimbles and turnbuckles

To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Rohn 55 thimbles and turnbuckles
From: Cqtestk4xs@aol.com
Date: Sat, 2 Sep 2006 22:55:19 EDT
List-post: <mailto:towertalk@contesting.com>
You recommend a 1/2" shackle, while Frank says a 3/8" shackle would  be
ideal. Do you see any problem with using a 3/8" shackle for my  terminations?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
A few years ago a front end loader caught one the lower guys on the tower  
consisting of a 1/4 inch guy, BIG 3/4 inch turnbuckles, and a 3/8 heavy  
thimble.  The guy wire broke, the guy grip held and the thimble was  distorted, 
but 
not too badly.  And the 3/4 inch turnbuckle?....like nothing  ever happened
 
Moral...guy grips DO hold,  the 3/8 thimble held just fine and bigger  is 
better when using turnbuckles.
 
Bill K4XS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>