If you change to SS cable you should
use 1/4 inch instead of 3/16...
Ted
On Wed, 1 Nov 2006 20:44:29 -0500 "Bob Maser" <bmaser@tampabay.rr.com>
writes:
> BTW, the specs on the LM 354 Tri-ex tower specifies 3/16" x 7 x 19
> aircraft
> cable NOT 1/4". Look it up in Google under LM 354 Tower Specs. It
> is the
> first hit on Google.
>
> Bob
> ----- Original Message -----
> From: "Bob Maser" <bmaser@tampabay.rr.com>
> To: <KJ6Y@aol.com>; <K7LXC@aol.com>; <towertalk@contesting.com>;
> <k2qmf@juno.com>; <n2tu@roadrunner.com>
> Sent: Wednesday, November 01, 2006 8:31 PM
> Subject: Re: [TowerTalk] Winch cable for a LM354
>
>
> > Why does the LM354 use 1/4" when the LM470 use 3/16"? I've
> recabled 3 of
> > these LM470 towers and the cable replaced was 3/16". SS cable is
> weaker
> > and
> > costs over 40% more.
> >
> > Bob W6TR
> > ----- Original Message -----
> > From: <KJ6Y@aol.com>
> > To: <K7LXC@aol.com>; <towertalk@contesting.com>;
> <k2qmf@juno.com>;
> > <n2tu@roadrunner.com>
> > Sent: Wednesday, November 01, 2006 7:46 PM
> > Subject: Re: [TowerTalk] Winch cable for a LM354
> >
> >
> >> LM-354 uses 1/4 in cable. Stainless is OK.
> >>
> >> Skip, KJ6Y
> >> _Communications Service Co_
> (http://members.aol.com/kj6y/skip.html)
> >> 818-887-3569
> >>
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|