Towertalk Mailing List (date)

Towertalk Mailing List (date)

[Thread Index] [Top] [All Lists]

November 30, 2006

Re: [TowerTalk] Problems with public housing, Anthony Rick, 22:53
Re: [TowerTalk] Locking a Turnbuckle...??, Dan Zimmerman N3OX, 22:52
[TowerTalk] Wooden Towers, AD5VJ Bob, 22:09
[TowerTalk] Installing crimp-on / clamp-on connector to LMR-400/600cable, Allen R. Brier, 21:57
Re: [TowerTalk] Locking a Turnbuckle...??, Bill Turner, 21:52
Re: [TowerTalk] Problems with public housing, Jerry Keller, 21:30
Re: [TowerTalk] Locking a Turnbuckle...??, Frederick M. Mott, 20:48
Re: [TowerTalk] LMR-400 with Rotators - A Dilemma, K8RI on TowerTalk, 19:42
Re: [TowerTalk] Verticals and Raised Radials, donovanf, 19:26
Re: [TowerTalk] Verticals and Raised Radials, Pat Chiles, 19:15
[TowerTalk] Verticals and Raised Radials, Pat Chiles, 18:32
Re: [TowerTalk] Locking a Turnbuckle...??, W3YY, 18:26
[TowerTalk] Problems with public housing, vk6jb, 18:17
Re: [TowerTalk] ABS Weatherproof Boxes, Mike Fatchett, 17:36
Re: [TowerTalk] Locking a Turnbuckle...??, jp, 17:27
Re: [TowerTalk] Locking a Turnbuckle...??, Jim Rhodes, 17:06
[TowerTalk] Locking a Turnbuckle...??, Bill Winkis, 15:58
[TowerTalk] ABS Weatherproof Boxes, Pete Smith, 14:36
[TowerTalk] AKO account for crank-up mast manual, Anthony Rick, 12:56
Re: [TowerTalk] TowerTalk] LMR-400 with Rotators - A Dilemma, Cqtestk4xs, 11:22
Re: [TowerTalk] free towers?, Bill Turner, 11:16
[TowerTalk] Rohn 25, John, 11:03
[TowerTalk] LMR-400 with rotators, C Dwight Baker, 10:01
[TowerTalk] TowerTalk] LMR-400 with Rotators - A Dilemma, Phil Camera, 09:29
[TowerTalk] Baluln query, Barry Fox, 09:16
Re: [TowerTalk] tower wanted, ny6dx, 09:16
Re: [TowerTalk] Wires on Freestanding Towers, Robskel, 09:16
Re: [TowerTalk] Sloper, bob finger, 08:18
[TowerTalk] LMR-400 with Rotators - A Dilemma, Dennis OConnor, 08:08
[TowerTalk] Sloper, nd8l@juno.com, 07:55
[TowerTalk] 40 meter beams, Dennis OConnor, 07:49
[TowerTalk] LMR-400 with Rotators - A Dilemma, Dr M J DiGirolamo, 04:15
Re: [TowerTalk] Stuck aluminum tubes and caution, Peter Chadwick, 04:08
Re: [TowerTalk] SteppIR Wind Damage, VR2BrettGraham, 03:43
Re: [TowerTalk] Stuck aluminum tubes and caution, K8RI on TowerTalk, 01:35

November 29, 2006

Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, Charles Gallo, 22:46
Re: [TowerTalk] stacking monobanders, Rick Karlquist, 22:46
[TowerTalk] Rd: custom aluminum panels-acrylic, ABS, too., K7LXC, 21:50
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, k6xyz, 21:38
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, Tom Osborne, 21:17
Re: [TowerTalk] Stretching THHN house wiring, Jim Brown, 20:30
Re: [TowerTalk] Stuck aluminum tubes and caution, Pat Barthelow, 20:12
Re: [TowerTalk] stacking monobanders, David Gilbert, 20:00
Re: [TowerTalk] SteppIR Wind Damage, Michael Hatzakis Jr MD, 19:52
[TowerTalk] Fwd: RE: SteppIR Wind Damage, VR2BrettGraham, 19:36
Re: [TowerTalk] SteppIR Wind Damage, VR2BrettGraham, 19:32
Re: [TowerTalk] stacking monobanders, David Gilbert, 19:30
[TowerTalk] 40 meter beams, yahoo email, 18:37
Re: [TowerTalk] Stuck aluminum tubes and caution, Peter Chadwick, 17:47
Re: [TowerTalk] Stuck aluminum tubes and caution, K8RI on TowerTalk, 17:23
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, Keith Dutson, 16:55
Re: [TowerTalk] stacking monobanders, Rick Karlquist, 16:48
[TowerTalk] Rust on Tower Cable, Fritz Hurd, 16:23
Re: [TowerTalk] Stuck aluminum tubes and caution, john, 15:33
Re: [TowerTalk] Stretching THHN house wiring, BRENT BAUM, 15:30
Re: [TowerTalk] Stretching THHN house wiring, Lee Buller, 15:23
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 115, Craig Clark, 14:43
Re: [TowerTalk] Stuck aluminum tubes and caution, K8RI on TowerTalk, 14:20
[TowerTalk] Stuck aluminum tubes, k3hx@juno.com, 14:00
Re: [TowerTalk] Stretching THHN house wiring, Cqtestk4xs, 13:36
Re: [TowerTalk] Stretching THHN house wiring, Clive Whelan, 13:19
[TowerTalk] Stretching THHN house wiring, Pete Smith, 12:53
Re: [TowerTalk] stacking monobanders, Al Williams, 12:43
[TowerTalk] free towers?, Jim Jarvis, 12:35
Re: [TowerTalk] How do you separate aluminium tubes that are stucktogether ?, Cqtestk4xs, 12:17
Re: [TowerTalk] stacking monobanders, David Gilbert, 11:30
Re: [TowerTalk] Masts, BRENT BAUM, 11:24
[TowerTalk] Chainlube; Good Waterproofing Grease in a Can, Pat Barthelow, 11:20
Re: [TowerTalk] custom aluminum panels-acrylic, ABS, too., Jason Creager, 11:17
Re: [TowerTalk] Wires on Freestanding Towers, Mike Fatchett, 11:12
Re: [TowerTalk] How do you separate aluminium tubes thatarestucktogether ?, AD5VJ Bob, 11:10
Re: [TowerTalk] SteppIR Wind Damage, Michael Hatzakis Jr MD, 11:07
Re: [TowerTalk] How do you separate aluminium tubes that are stucktogether ?, Dan Hearn, 11:06
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, AD5VJ Bob, 11:06
[TowerTalk] Wires on Freestanding Towers, Jerry Keller, 10:59
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, John W2iD, 10:54
Re: [TowerTalk] How do you separate aluminium tubes that are stucktogether ?, Doug Renwick, 10:53
Re: [TowerTalk] How do you separate aluminium tubes thatarestuck together ?, AD5VJ Bob, 10:49
Re: [TowerTalk] stacking monobanders, K4SAV, 10:37
Re: [TowerTalk] How do you separate aluminium tubes that are stucktogether ?, Dan Bookwalter, 09:27
Re: [TowerTalk] How do you separate aluminium tubes thatare stuck together ?, donovanf, 09:19
Re: [TowerTalk] Balun query, Jim Lux, 09:14
Re: [TowerTalk] Balun query, Jim Lux, 09:14
Re: [TowerTalk] How do you separate aluminium tubes that arestuck together ?, Peter Chadwick, 09:02
Re: [TowerTalk] Balun query, Peter Chadwick, 09:00
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Tim Kass, 08:57
Re: [TowerTalk] How do you separate aluminium tubes that arestucktogether ?, AD5VJ Bob, 08:39
Re: [TowerTalk] Balun query, Clint Talmadge, 08:16
[TowerTalk] How do you separate aluminium tubes that are stucktogether ?, Robert Thain, 08:13
[TowerTalk] ACCESS BOXES, TOMMY HALIBURTON, 07:45
[TowerTalk] Balun query, Barry Fox, 07:45
Re: [TowerTalk] 15 meter decoupler, Trent and Lorraine, 05:37
Re: [TowerTalk] SteppIR Wind Damage, BobK8IA, 03:46
Re: [TowerTalk] stacking monobanders, David Gilbert, 01:01
Re: [TowerTalk] Plumbing a Tower, Jim Lux, 00:49
Re: [TowerTalk] stacking monobanders, Richard (Rick) Karlquist, 00:00

November 28, 2006

Re: [TowerTalk] Masts, Michael Tope, 23:49
[TowerTalk] Mast Coating to Prevent Rust, Garry Drummond, 22:17
Re: [TowerTalk] are small loops in beverages bad?, W2RU - Bud Hippisley, 22:04
Re: [TowerTalk] SteppIR Wind Damage, VR2BrettGraham, 22:02
[TowerTalk] triband stacks, Gregg Seidl, 21:47
Re: [TowerTalk] Masts, Bill Turner, 20:34
Re: [TowerTalk] antenna height, Bill Turner, 20:27
[TowerTalk] Masts, AD5VJ Bob, 20:24
[TowerTalk] antenna height, Merlin-7 KI4ILB, 20:18
[TowerTalk] antenna height, Merlin-7 KI4ILB, 19:00
Re: [TowerTalk] Plumbing a Tower, john, 18:22
Re: [TowerTalk] stacking monobanders, David Gilbert, 17:34
Re: [TowerTalk] Cap at the tower question, W2RU - Bud Hippisley, 17:30
[TowerTalk] antenna height, Merlin-7 KI4ILB, 17:23
Re: [TowerTalk] stacking monobanders, Doug Renwick, 17:14
Re: [TowerTalk] stacking monobanders, David Gilbert, 16:03
Re: [TowerTalk] EZ-Way tower information, phil, 15:52
Re: [TowerTalk] stacking monobanders, David Gilbert, 15:46
Re: [TowerTalk] stacking monobanders, Doug Renwick, 15:27
Re: [TowerTalk] stacking monobanders, Al Williams, 14:23
[TowerTalk] PLUMBING A TOWER, FireBrick, 13:46
Re: [TowerTalk] custom aluminum panels, Keith Dutson, 13:36
Re: [TowerTalk] custom aluminum panels, Pete Smith, 13:34
Re: [TowerTalk] custom aluminum panels, Joe Giacobello, 13:27
[TowerTalk] Cap at the tower question, Clint Talmadge, 12:46
Re: [TowerTalk] custom aluminum panels, BRENT BAUM, 12:39
Re: [TowerTalk] custom aluminum panels, Jim Lux, 12:21
Re: [TowerTalk] custom aluminum panels, Mike, 12:09
Re: [TowerTalk] Plumbing a Tower, Keith Dutson, 12:09
Re: [TowerTalk] Plumbing a Tower, David Gilbert, 11:55
Re: [TowerTalk] Gin Pole, Bob Maser, 11:53
Re: [TowerTalk] Plumbing a Tower, k6xyz, 11:45
Re: [TowerTalk] are small loops in beverages bad?, Paul Kelley N1BUG, 11:37
[TowerTalk] Gin Pole, CWAMSSB, 11:31
Re: [TowerTalk] are small loops in beverages bad?, David Gilbert, 11:21
[TowerTalk] Plumbing a Tower, Dale Martin, 11:20
Re: [TowerTalk] RE : custom aluminum panels, Keith Dutson, 11:09
Re: [TowerTalk] EZ-Way tower information, Harry Brown, 11:02
[TowerTalk] Rohn Catalog, Jack - K4WSB, 11:00
[TowerTalk] EZ-Way tower information, Lance, 10:32
Re: [TowerTalk] Storm Damage to SteppIR, Mike Fatchett, 10:32
Re: [TowerTalk] 15 meter decoupler, Dan Zimmerman N3OX, 09:50
Re: [TowerTalk] RE : custom aluminum panels, k6xyz, 09:45
Re: [TowerTalk] Lightning protection for rotator cable, Pete Raymond, 09:21
[TowerTalk] RE : custom aluminum panels, Jim Lux, 09:18
[TowerTalk] are small loops in beverages bad?, Tonno Vahk, 08:53
Re: [TowerTalk] Rohn 25 bracketed at 15', Alan NV8A, 08:16
Re: [TowerTalk] stacking monobanders, K7LXC, 07:14
[TowerTalk] SteppIR Wind Damage, Gary Dixon K4MQG, 06:49
[TowerTalk] Rohn 25 bracketed at 15', NY1E, 06:49
[TowerTalk] RE : custom aluminum panels, hermans, 05:27
Re: [TowerTalk] 15 meter decoupler, Trent and Lorraine, 04:31
Re: [TowerTalk] Minimum Rotor cable for 250 ft run, Pete Smith, 00:45
Re: [TowerTalk] custom aluminum panels, Jim Lux, 00:15

November 27, 2006

Re: [TowerTalk] Minimum Rotor cable for 250 ft run, Cqtestk4xs, 23:54
[TowerTalk] Yagi Parts, Daniel Hileman, 23:33
Re: [TowerTalk] Minimum Rotor cable for 250 ft run, Mike, 23:28
Re: [TowerTalk] custom aluminum panels, Les Kalmus, 21:27
Re: [TowerTalk] custom aluminum panels, Jerrry BOYD, 21:25
Re: [TowerTalk] custom aluminum panels, Richard M. Gillingham, 21:23
[TowerTalk] custom aluminum panels, Jim Lux, 21:08
Re: [TowerTalk] ACCESS BOX, K8RI on TowerTalk, 20:47
Re: [TowerTalk] Minimum Rotor cable for 250 ft run, Joe Giacobello, 19:41
[TowerTalk] Stacking Monobanders, Dennis W0JX, 19:30
Re: [TowerTalk] stacking monobanders, donovanf, 19:24
Re: [TowerTalk] ACCESS BOX, Jim Lux, 18:50
[TowerTalk] stacking monobanders, ny6dx, 18:39
Re: [TowerTalk] ACCESS BOX, Les Kalmus, 17:16
Re: [TowerTalk] ACCESS BOX, K8RI on TowerTalk, 16:02
Re: [TowerTalk] ACCESS BOX, Pete Smith, 14:25
[TowerTalk] ACCESS BOX, Phil Camera, 10:34
Re: [TowerTalk] ACCESS BOX, Bill Turner, 10:26
Re: [TowerTalk] ACCESS BOX, Mike Fatchett, 10:19
Re: [TowerTalk] ACCESS BOX, kb8nnu, 10:19
Re: [TowerTalk] ACCESS BOX, Jim Lux, 10:13
Re: [TowerTalk] LMR600, W7CE, 10:04
Re: [TowerTalk] ACCESS BOX, Bob Maser, 10:01
Re: [TowerTalk] ACCESS BOX, ersmar, 09:42
Re: [TowerTalk] [Bulk] Re: LMR600, Michael Hatzakis, Jr MD, 09:32
Re: [TowerTalk] LMR600, Michael Hatzakis, Jr MD, 09:32
[TowerTalk] FOR SALE, k6yra Al, 09:31
Re: [TowerTalk] HF vertical opinions, Dan Zimmerman N3OX, 09:05
[TowerTalk] ACCESS BOX, TOMMY HALIBURTON, 08:56
Re: [TowerTalk] LMR-600 cable bends in conduit, Bob Maser, 06:52
Re: [TowerTalk] Minimum Rotor cable for 250 ft run, K8RI on TowerTalk, 05:07
[TowerTalk] Minimum Rotor cable for 250 ft run, Allen R. Brier, 02:26
Re: [TowerTalk] HF vertical opinions, Joe Subich, W4TV, 01:54
Re: [TowerTalk] LMR-600 cable bends in conduit, K8RI on TowerTalk, 01:49
Re: [TowerTalk] HF vertical opinions, Jim Lux, 00:52
[TowerTalk] LMR-600 cable bends in conduit, Allen R. Brier, 00:23

November 26, 2006

[TowerTalk] 15 meter decoupler, Tom Osborne, 23:41
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 95, C Dwight Baker, 23:11
Re: [TowerTalk] LMR600, K8RI on TowerTalk, 23:07
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 95, C Dwight Baker, 23:01
Re: [TowerTalk] HF vertical opinions, Joe Subich, W4TV, 22:27
[TowerTalk] LMR600, Craig Thompson, 22:05
[TowerTalk] HF Vertical....data...., Jim Jarvis, 21:33
Re: [TowerTalk] Needed: Andrews LDF4-50A Coax, K8RI on TowerTalk, 21:30
Re: [TowerTalk] LMR600, K8RI on TowerTalk, 21:27
Re: [TowerTalk] Need HF Vertical opinions..., Bill Turner, 21:26
Re: [TowerTalk] Grounding the rotor cable, K8RI on TowerTalk, 21:04
[TowerTalk] LMR600, Jim McDonald, 21:03
[TowerTalk] Needed: Andrews LDF4-50A Coax, Dr M J DiGirolamo, 20:48
[TowerTalk] Grounding the rotor cable, Cqtestk4xs, 20:39
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Bob Nielsen, 20:03
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Mike Fatchett, 19:48
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Gedas, 19:41
[TowerTalk] RE : Ask the Experts, hermans, 19:39
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Kelly Taylor, 19:35
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Mike Fatchett, 19:19
Re: [TowerTalk] HF Vertical Opinions NEEDED..., D. Scott MacKenzie, 19:15
Re: [TowerTalk] Need HF Vertical opinions..., Jim Miller, 17:55
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Bob Maser, 17:29
Re: [TowerTalk] HF Vertical Opinions NEEDED..., rdhinkle, 17:28
Re: [TowerTalk] HF Vertical Opinions NEEDED..., K8RI on TowerTalk, 17:21
Re: [TowerTalk] HF Vertical Opinions NEEDED..., K8RI on TowerTalk, 17:17
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Bob Nielsen, 17:01
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Red, 16:42
Re: [TowerTalk] HF Vertical Opinions NEEDED..., K8RI on TowerTalk, 16:26
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Peter Voelpel, 16:11
Re: [TowerTalk] HF Vertical Opinions NEEDED..., K7LXC, 15:31
[TowerTalk] New Release: Antennas & Antenna Modeling by LB Cebik -A 17-book Collection, K7LXC, 15:18
Re: [TowerTalk] interaction problem..., David Gilbert, 14:30
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Bob Maser, 14:14
Re: [TowerTalk] interaction problem..., StellarCAT, 14:10
Re: [TowerTalk] Need HF Vertical opinions..., wa3afs, 14:07
Re: [TowerTalk] Need HF Vertical opinions..., Bill Turner, 13:55
[TowerTalk] Lightning protection for rotator cable, Phil Camera, 13:48
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Robskel, 13:45
[TowerTalk] Please let me know how to climb saely to the roof fromthe ladder to check on the connections of a TV wire possiblyloosened from a storm?, Luke Ting, 13:45
[TowerTalk] Foundation for a tilt-over, Brent Baum, 13:45
[TowerTalk] Need HF Vertical opinions..., R. David Eagle, 13:44
Re: [TowerTalk] interaction problem..., David Gilbert, 13:36
Re: [TowerTalk] Lightning protection for rotator cable, Gedas, 13:33
Re: [TowerTalk] HF vertical opinions, Jim Lux, 13:17
Re: [TowerTalk] Lightning protection for rotator cable, Pete Smith, 13:09
[TowerTalk] interaction... continued, StellarCAT, 13:05
[TowerTalk] Lightning protection for rotator cable, Bill Turner, 12:47
[TowerTalk] HF vertical opinions, Rob Atkinson, K5UJ, 12:28
Re: [TowerTalk] interaction... continued, k6xyz, 12:12
[TowerTalk] interaction... continued, StellarCAT, 11:19

November 25, 2006

[TowerTalk] interaction... continued, StellarCAT, 22:20
[TowerTalk] interaction problem..., StellarCAT, 22:17
[TowerTalk] Broadcast Band Interference, mryan001, 19:57
Re: [TowerTalk] Ask the Experts, kk5oq, 18:17
Re: [TowerTalk] HF Vertical Opinions NEEDED..., WA3GIN, 16:49
Re: [TowerTalk] Shortened Antennas for 160, Rick Karlquist, 16:27
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Mike (K6BR), 16:26
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Bob Maser, 15:28
[TowerTalk] Shortened Antennas for 160, crawfish, 14:15
Re: [TowerTalk] computer rfi, Rick Scott, 13:21
Re: [TowerTalk] HF Vertical Opinions NEEDED..., Rick Scott, 13:18
[TowerTalk] HF Vertical Opinions NEEDED..., R. David Eagle, 12:15
[TowerTalk] Ground Connection to a Well Casing, Doug Rehman, 12:10
[TowerTalk] Rhon 25, John, 11:52
[TowerTalk] computer rfi, Jim Miller WB5OXQ, 11:34
Re: [TowerTalk] Iron <-> copper tinned : Redox reaction??, K4SAV, 01:51

November 24, 2006

Re: [TowerTalk] Large Arrays, David Thompson, 22:52
Re: [TowerTalk] Fallen tower may rise again, Donald Chester, 16:03
Re: [TowerTalk] Force 12 Email list, Lee Armitage, 15:27
Re: [TowerTalk] Force 12 Email list, Todd Coulter, 15:26
[TowerTalk] Force 12 Email list, Ken Kinyon, 15:19
[TowerTalk] Sky Needle Base, Bob Maser, 14:21
[TowerTalk] Foundation for a tilt-over, BRENT BAUM, 14:18
Re: [TowerTalk] Iron <-> copper tinned : Redox reaction??, Beat Meier, 13:57
Re: [TowerTalk] Where does the element go?, K7LXC, 13:41
Re: [TowerTalk] Where does the element go?, AA6DX - Mark, 13:37
Re: [TowerTalk] Ground - at base of tower or entrance to house?, K7LXC, 13:35
Re: [TowerTalk] BIG array, K7LXC, 13:30
Re: [TowerTalk] Protecting screw contacts on rotor, K7LXC, 13:25
Re: [TowerTalk] Installing and tensioning guywires, K7LXC, 13:23
Re: [TowerTalk] Big 40M Yagi, Rob, 13:05
[TowerTalk] WTB: Rohn 25G BPL25G top plate & Ameritron RCS-8V switch, John., 12:29
Re: [TowerTalk] Measuring coax loss with MFJ-259B, Jim Lux, 11:55
Re: [TowerTalk] Iron <-> copper tinned : Redox reaction??, K4SAV, 11:51
[TowerTalk] Measuring coax loss with MFJ-259B, Pete Smith, 10:58
Re: [TowerTalk] Ask the Experts, Mirko S57AD, 07:28
[TowerTalk] Ask the Experts, kk5oq, 06:49
Re: [TowerTalk] Large Arrays, Bob Maser, 00:30

November 23, 2006

Re: [TowerTalk] FW: K5GO 6 Element 40M YAGI, AD5VJ Bob, 23:55
[TowerTalk] Large Arrays, WarrenWolff, 23:42
Re: [TowerTalk] Guy Anchor Location - Hill, Dick Green WC1M, 23:35
Re: [TowerTalk] Where does the element go?, J. Gordon Beattie, Jr., W2TTT, 23:23
Re: [TowerTalk] Where does the element go?, David Gilbert, 23:18
Re: [TowerTalk] FW: K5GO 6 Element 40M YAGI, Mike Fatchett, 22:44
Re: [TowerTalk] FW: K5GO 6 Element 40M YAGI, J. Gordon Beattie, Jr., W2TTT, 22:22
Re: [TowerTalk] Where does the element go?, J. Gordon Beattie, Jr., W2TTT, 22:18
Re: [TowerTalk] Where does the element go?, Bill Turner, 22:17
Re: [TowerTalk] Where does the element go?, Ted Bryant, 21:17
[TowerTalk] Iron <-> copper tinned : Redox reaction??, Beat Meier, 21:04
[TowerTalk] WAY off subject, Gregg Seidl, 20:43
Re: [TowerTalk] Computer RFI, K8RI on TowerTalk, 20:21
Re: [TowerTalk] Computer RFI, k6xyz, 20:12
Re: [TowerTalk] Fallen tower may rise again, K7LXC, 19:54
[TowerTalk] FW: K5GO 6 Element 40M YAGI, Mike Fatchett, 19:50
Re: [TowerTalk] Big 40M Yagi, Clint Talmadge, 19:35
Re: [TowerTalk] Big 40M Yagi, Don Havlicek, 19:23
[TowerTalk] Fw: rotor repair, ec1cwg, 19:03
[TowerTalk] BIG array, john, 18:35
[TowerTalk] Big 40M Yagi, John Kjos, 17:15
Re: [TowerTalk] Where does the element go?, Bob Newton W5RN, 15:51
Re: [TowerTalk] Guy Anchor Location - Hill, Cqtestk4xs, 15:04
[TowerTalk] Guy Anchor Location - Hill, Robert Hess, 14:39
Re: [TowerTalk] Big Array, Dan Zimmerman N3OX, 14:38
[TowerTalk] Adaptor F to PL259, ABowenN4OO, 14:36
[TowerTalk] rotor repair, Garry, 14:36
[TowerTalk] Stub positions, Tom Osborne, 14:18
Re: [TowerTalk] Fallen tower may rise again, K8RI on TowerTalk, 13:58
[TowerTalk] (no subject), NØATH, 13:57
Re: [TowerTalk] Fallen tower may rise again, K8RI on TowerTalk, 13:38
Re: [TowerTalk] Where does the element go?, Cqtestk4xs, 13:35
Re: [TowerTalk] Fallen tower may rise again, bob finger, 11:40
Re: [TowerTalk] Fallen tower may rise again, k6xyz, 11:40
Re: [TowerTalk] Fallen tower may rise again, Joe Subich, W4TV, 11:19
[TowerTalk] RE : Computer RFI, hermans, 10:36
Re: [TowerTalk] Computer RFI, Bill Turner, 10:35
Re: [TowerTalk] Big Array, Bill Turner, 10:30
Re: [TowerTalk] Tower Grounding, ersmar, 10:26
[TowerTalk] Tower Grounding, Kirk, 10:02
Re: [TowerTalk] Tower/Interior Cabling Hardware....., k6xyz, 09:57
Re: [TowerTalk] Earth Station Radio Site, complete,Avaialable for Purchase, k6xyz, 09:52
[TowerTalk] Simulating mounting plates in YW, Gary - N3JPU, 08:38
Re: [TowerTalk] Where does the element go?, Pete Smith, 07:35
Re: [TowerTalk] Where does the element go?, David Robbins K1TTT, 07:31
Re: [TowerTalk] Applying Prelube 6 to Tower cable, Bill Winkis, 07:19
Re: [TowerTalk] Where does the element go?, Pete Smith, 07:12
Re: [TowerTalk] Fallen tower may rise again, K8RI on TowerTalk, 05:04
Re: [TowerTalk] BIG array, Michael Tope, 04:15
[TowerTalk] Fallen tower may rise again, Dino Darling, 04:10
Re: [TowerTalk] Big Array, Chuck O'Neal, 00:46
Re: [TowerTalk] Big Array, Rick Scott, 00:42
Re: [TowerTalk] Where does the element go?, gdaught6, 00:25
Re: [TowerTalk] Big Array, HFDXJUNKIE, 00:11

November 22, 2006

Re: [TowerTalk] Computer RFI, K8RI on TowerTalk, 23:53
Re: [TowerTalk] BIG array, Jim Chaggaris, 23:33
[TowerTalk] yaesu rotor repair, Joe Barnes, 23:19
Re: [TowerTalk] LM-354HD 130 MPH Wind Load, Dave Hachadorian, 23:17
Re: [TowerTalk] Where does the element go?, K8RI on TowerTalk, 23:11
[TowerTalk] Need Orion OR2800DC Manual, Eugene Jensen, 23:07
Re: [TowerTalk] Computer RFI, Bill Turner, 23:05
Re: [TowerTalk] Computer RFI, K8RI on TowerTalk, 22:50
[TowerTalk] Where does the element go?, Bill Turner, 22:42
[TowerTalk] Tower Work, K8RI on TowerTalk, 22:31
Re: [TowerTalk] Ground - at base of tower or entrance to house?, K8RI on TowerTalk, 22:25
[TowerTalk] Ground - at base of tower or entrance to house?, Phil Camera, 22:20
Re: [TowerTalk] BIG array, Bill Turner, 22:19
[TowerTalk] Computer RFI, k8jdc, 22:01
[TowerTalk] CommScope 3227 Specifications, Allen R. Brier, 21:41
Re: [TowerTalk] Computer RFI, K8RI on TowerTalk, 21:37
Re: [TowerTalk] Applying Prelube 6 to Tower cable, Dr M J DiGirolamo, 20:36
Re: [TowerTalk] Computer RFI, W2RU - Bud Hippisley, 20:23
Re: [TowerTalk] BIG array, Mike Fatchett, 19:55
[TowerTalk] Ground - at base of tower or entrance to house?, Jim McDonald, 19:15
Re: [TowerTalk] Computer RFI, Clive Whelan, 19:09
Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Rick Karlquist, 18:59
Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), AA6DX - Mark, 18:43
[TowerTalk] LM-354HD 130 MPH Wind Load, Ted Huf W4ZE, 18:32
[TowerTalk] Computer RFI, Jim Miller WB5OXQ, 17:20
[TowerTalk] Applying Prelube 6 to Tower cable, Ed Laughery, 16:23
Re: [TowerTalk] Earth Station Radio Site, complete,Avaialable for Purchase, D. Scott MacKenzie, 16:08
Re: [TowerTalk] Big Array, Jim Jarvis, 15:46
Re: [TowerTalk] BIG array, David Robbins K1TTT, 15:36
[TowerTalk] Tri-ex Sky Needle Specs, Bob Maser, 15:07
Re: [TowerTalk] BIG array, K7LXC, 14:40
Re: [TowerTalk] BIG array, J. Gordon Beattie, Jr., W2TTT, 14:27
Re: [TowerTalk] Tower/Interior Cabling Hardware....., Blake Bowers, 14:07
[TowerTalk] BIG Array, Randall K Martin, 13:34
Re: [TowerTalk] BIG array, W7CE, 13:21
Re: [TowerTalk] BIG array, Larry Phipps, 13:05
[TowerTalk] Earth Station Radio Site, complete,Avaialable for Purchase, Pat Barthelow, 12:55
Re: [TowerTalk] BIG array, kd4e, 12:45
Re: [TowerTalk] BIG array, ve4xt, 12:41
Re: [TowerTalk] BIG array, BRENT BAUM, 12:26
[TowerTalk] FS: MFJ-986 Differential-T 3KW HF Antenna TunerCORRECTION, kd4e, 12:23
[TowerTalk] Rotators, Thomas Tow, 12:08
[TowerTalk] Tower/Interior Cabling Hardware....., Pat Barthelow, 12:06
Re: [TowerTalk] BIG array, Jim Forsyth, 12:02
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 69, donovanf, 11:49
Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Daron J. Wilson, 11:45
[TowerTalk] BIG array, Jim Jarvis, 11:35
Re: [TowerTalk] BIG array, kd4e, 11:27
Re: [TowerTalk] BIG array, Cqtestk4xs, 11:22
Re: [TowerTalk] BIG array, Mike Fatchett, 11:13
Re: [TowerTalk] BIG array, Rick Scott, 10:58
[TowerTalk] Berk-Tec 6308 cable, N2TK, Tony, 10:54
Re: [TowerTalk] BIG array, Bill Turner, 10:35
Re: [TowerTalk] Orion OR2800P, Jan Erik Holm, 10:32
Re: [TowerTalk] BIG array, Dan Zimmerman N3OX, 08:51
Re: [TowerTalk] BIG array, Tim Duffy K3LR, 08:49
Re: [TowerTalk] Yaesu FT2000?, K7LXC, 08:33
[TowerTalk] BIG array, K7LXC, 08:31
Re: [TowerTalk] 6-8 pin connectors, Pete Smith, 07:36
Re: [TowerTalk] Orion OR2800P, Pete Smith, 07:26
Re: [TowerTalk] Orion OR2800P, Marc Wullaert ON4MA, 02:55
Re: [TowerTalk] [RFI] Lutron and RFI, Jim Brown, 02:16
Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Jim Lux, 01:45
Re: [TowerTalk] Real waterproof connectors for rotators (was:source of6/8 pin connectors?), K8RI on TowerTalk, 00:48
[TowerTalk] 6-8 pin connectors, NY1E, 00:32
Re: [TowerTalk] [RFI] Lutron and RFI, dj, 00:32
Re: [TowerTalk] Source of 6/8 pin connectors?, AA6DX - Mark, 00:32
[TowerTalk] Fwd: Guying an Aluminum Tower, JMLTINC, 00:31
[TowerTalk] Real waterproof connectors for rotators (was: source of6/8 pin connectors?), Richard (Rick) Karlquist, 00:19

November 21, 2006

Re: [TowerTalk] Fastening sections of 3" boom material, Bill Turner, 23:58
Re: [TowerTalk] Guying an Aluminum Tower, Cqtestk4xs, 23:50
Re: [TowerTalk] Orion OR2800P, K8RI on TowerTalk, 22:06
Re: [TowerTalk] Orion OR2800P, K8RI on TowerTalk, 22:02
Re: [TowerTalk] Orion OR2800P, Keith Dutson, 20:14
Re: [TowerTalk] Source of 6/8 pin connectors?, donovanf, 19:57
Re: [TowerTalk] Source of 6/8 pin connectors?, Peter Dougherty, 19:52
Re: [TowerTalk] Orion OR2800P, Chuck O'Neal, 19:42
Re: [TowerTalk] Orion OR2800P, Bob Maser, 19:15
Re: [TowerTalk] [RFI] Lutron and RFI, Jim Lux, 19:10
[TowerTalk] Orion OR2800P, K8RI on TowerTalk, 19:02
Re: [RFI] [TowerTalk] Lutron and RFI, Tom Rauch, 19:01
Re: [TowerTalk] Guying Aluminum Tower, Doug Renwick, 18:05
[TowerTalk] Really light tower suggestions., k8jdc, 18:01
Re: [TowerTalk] Guying an Aluminum Tower, Jim Lux, 17:47
Re: [TowerTalk] Really light tower suggestions., Don Havlicek, 17:43
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Jim Lux, 17:34
Re: [TowerTalk] Guying an Aluminum Tower, k1vr, 17:33
[TowerTalk] Yaesu FT2000?, Tony, 16:59
[TowerTalk] Really light tower suggestions., Dan Zimmerman N3OX, 16:35
Re: [TowerTalk] Rotating a really BIG Antenna, Keith Dutson, 16:34
[TowerTalk] W8JK Wire Antenna, Garry, 16:05
[TowerTalk] Aluminium and copper, Donald Chester, 15:59
Re: [TowerTalk] Source of 6/8 pin connectors?, donovanf, 15:57
Re: [TowerTalk] Guying an Aluminum Tower, Dan Zimmerman N3OX, 15:56
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, mryan001, 15:54
Re: [TowerTalk] Source of 6/8 pin connectors?, Brad Pioveson W9FX, 15:53
[TowerTalk] Rotating a really BIG Antenna, Keith Dutson, 15:52
Re: [TowerTalk] Source of 6/8 pin connectors?, k6xyz, 15:42
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Donald Chester, 15:42
[TowerTalk] Source of 6/8 pin connectors?, Phil Camera, 15:23
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Donald Chester, 15:14
[TowerTalk] Source of 6/8 pin connectors?, Jim McDonald, 15:13
[TowerTalk] mast weight on the rotor or thrust bearing?, Phil Camera, 14:44
Re: [TowerTalk] Phasing 2 Verticals, Jim Lux, 14:43
Re: [TowerTalk] Guying an Aluminum Tower, Jim Lux, 14:42
[TowerTalk] Installing and tensioning guywires, Phil Camera, 14:20
[TowerTalk] Guying Aluminum Tower, Phil Camera, 14:15
Re: [TowerTalk] Phasing 2 Verticals, D. Scott MacKenzie, 12:48
Re: [TowerTalk] Guying an Aluminum Tower, Doug Renwick, 12:06
[TowerTalk] Coupling 3" boom sections, NPAlex, 11:27
[TowerTalk] FS: MFJ-986 Differential-T 3KW HF Antenna Tuner, kd4e, 11:17
Re: [TowerTalk] Guying an Aluminum Tower, mryan001, 10:59
Re: [TowerTalk] Guying an Aluminum Tower, Don Havlicek, 10:49
[TowerTalk] Guying an Aluminum Tower, Dennis W0JX, 10:38
Re: [TowerTalk] [RFI] Lutron and RFI, Jim Lux, 10:16
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, K8RI on TowerTalk, 09:38
[TowerTalk] Fastening sections of 3" boom material, john, 09:21
Re: [TowerTalk] Radials on a fence and weatherproofing connectors, K7LXC, 09:11
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, K7LXC, 09:08
Re: [TowerTalk] Dumb Question, Jim Lux, 09:04
Re: [TowerTalk] Installing and tensioning guywires, K7LXC, 08:55
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Jim Lux, 08:55
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Jim Lux, 08:55
Re: [TowerTalk] anti-seize, K8RI on TowerTalk, 08:34
[TowerTalk] anti-seize, N2TK, Tony, 08:00
Re: [TowerTalk] Fastening sections of 3" boom material, Bill Winkis, 07:24
Re: [TowerTalk] Fastening sections of 3" boom material, donovanf, 06:57
Re: [TowerTalk] Overlapping or soldered radials for 4 Square?, Tonno Vahk, 03:42
[TowerTalk] Fastening sections of 3" boom material, Bill Turner, 00:37

November 20, 2006

Re: [TowerTalk] Dumb Question, donovanf, 23:49
[TowerTalk] Dumb Question, D. Scott MacKenzie, 23:22
Re: [TowerTalk] LMR400/BR400 questions, J. Gordon Beattie, Jr., W2TTT, 23:13
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, K8RI on TowerTalk, 22:12
Re: [TowerTalk] OT - RF quiet light dimmers, David J. Ring, Jr., 21:50
[TowerTalk] CDE Rotor Problems, Chuck N7BV, 21:16
Re: [TowerTalk] OT - RF quiet light dimmers, Bill Turner, 21:11
Re: [TowerTalk] radial wire, wa3afs, 21:09
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Bill Turner, 21:08
[TowerTalk] radial wire, Merlin-7 KI4ILB, 20:47
Re: [TowerTalk] [RFI] Lutron and RFI, Charles Gallo, 20:33
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, k6xyz, 20:20
Re: [TowerTalk] Mast weight on the rotor or thrust bearing., Dan Zimmerman N3OX, 19:56
Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Donald Chester, 19:52
Re: [RFI] Lutron and RFI, Tom Rauch, 19:49
Re: [TowerTalk] Mast weight on the rotor or thrust bearing., John E. Cleeve, 19:44
[RFI] Lutron and RFI, Charles Gallo, 19:27
Re: [TowerTalk] Protecting screw contacts on rotor, donovanf, 19:19
[TowerTalk] OT - RF quiet light dimmers, David J. Ring, Jr., 19:16
[TowerTalk] Protecting screw contacts on rotor, Mike Miller, 19:13
Re: [TowerTalk] Copper wire prices, Jim Lux, 19:04
Re: [TowerTalk] [Fwd: Re: [RFI] Haolgens AND . . .], Jim Lux, 18:55
Re: [TowerTalk] LMR400/BR400 questions, K8RI on TowerTalk, 17:59
[TowerTalk] Lmost ready to install 180ft tower, Beat Meier, 17:47
[TowerTalk] Photos of mystery tower., BRENT BAUM, 17:41
Re: [TowerTalk] Copper wire prices, K8RI on TowerTalk, 17:30
[TowerTalk] Large insulators for sale, Clint Talmadge, 17:04
Re: [TowerTalk] Overlapping or soldered radials for 4 Square?, Red, 17:04
[TowerTalk] [Fwd: Re: [RFI] Haolgens AND . . .], David Gilbert, 16:01
Re: [TowerTalk] Overlapping or soldered radials for 4 Square?, Tim Duffy K3LR, 15:45
[TowerTalk] Overlapping or soldered radials for 4 Square?, Tonno Vahk, 15:25
Re: [TowerTalk] [RFI] Haolgens AND . . ., Clint Talmadge, 15:25
Re: [TowerTalk] [RFI] Haolgens AND . . ., Jim Brown, 15:01
Re: [TowerTalk] LMR400/BR400 questions, Gary Schafer, 12:21
Re: [TowerTalk] Copper wire prices, wa3afs, 10:24
Re: [TowerTalk] Copper wire prices, Chuck Sudds, 09:52
[TowerTalk] Head unit roller bearing, John E. Cleeve, 09:21
[TowerTalk] aluminum radials was Re: Copper wire prices, Jim Lux, 09:20
Re: [TowerTalk] LMR400/BR400 questions, Dale Martin, 09:19
[TowerTalk] 2 - Telrex TB6EM's F/S, Glen Turner, 08:45
[TowerTalk] FS: KD9SV DXPedition Model PreAmp, Bill G. K3SV, 08:45
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, John E. Cleeve, 06:10
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, K8RI on TowerTalk, 02:21
Re: [TowerTalk] LMR400/BR400 questions, J. Gordon Beattie, Jr., W2TTT, 01:45
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, Dan Zimmerman N3OX, 01:30
[TowerTalk] Copper wire prices, Roger Parsons, 00:11

November 19, 2006

[TowerTalk] Radials on a fence and weatherproofing connectors, Peter Dougherty, 22:29
Re: [TowerTalk] rotor repair, K8RI on TowerTalk, 19:33
[TowerTalk] Need MA40RB base, rdhinkle, 17:46
Re: [TowerTalk] Copper wire prices, Donald Chester, 16:39
Re: [TowerTalk] Copper wire prices, Donald Chester, 16:18
Re: [TowerTalk] Query RFI, michael taylor, 15:35
Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI, Jim Lux, 14:14
Re: [TowerTalk] Query RFI, kd4e, 14:06
Re: [TowerTalk] Query RFI, Peter Dougherty, 13:13
Re: [TowerTalk] rotor repair, David Thompson, 12:32
Re: [TowerTalk] Looking for Ideas - What to Put on Tower, Bill Parry, 11:44
[TowerTalk] Looking for Ideas - What to Put on Tower, Larry Burke, 11:23
Re: [TowerTalk] 17 Meter Antenna, Bob Maser, 10:12
Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI, Bob Maser, 10:10
[TowerTalk] 17 Meter Antenna, Rick Ellison, 09:51
Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI, Kirk, 09:25
Re: [TowerTalk] [TVI-RFI-EMI] Re: Query RFI, ARS NZ3O, 07:42
Re: [TowerTalk] Query RFI, ersmar, 00:32

November 18, 2006

Re: [TowerTalk] rotor repair, K8RI on TowerTalk, 23:03
[TowerTalk] Query RFI, Jim Jarvis, 19:22
[TowerTalk] 160 m. antenna ideas, Rob Atkinson, K5UJ, 19:18
Re: [TowerTalk] RE : Query RFI, K8RI on TowerTalk, 19:08
Re: [TowerTalk] rotor repair, K8RI on TowerTalk, 18:31
Re: [TowerTalk] mast strength, W5LT, 18:25
[TowerTalk] RE : Query RFI, hermans, 18:10
[TowerTalk] rotor repair, Gregg Seidl, 18:06
Re: [RFI] Query RFI, kd4e, 17:50
[TowerTalk] mast strength, Gregg Seidl, 17:47
Re: [TowerTalk] Query RFI, K8RI on TowerTalk, 16:58
Re: [TowerTalk] mast weight on the rotor or thrust bearing?, K8RI on TowerTalk, 16:46
Re: [RFI] Query RFI, kd4e, 16:44
Re: [TowerTalk] Query RFI, k6xyz, 16:43
[TowerTalk] Query RFI, WarrenWolff, 16:12
Re: [TowerTalk] Copper wire prices, Jim Lux, 12:18
[TowerTalk] FS:Rotors and Control Boxes, Bill G. K3SV, 11:45
[TowerTalk] mast weight on the rotor or thrust bearing?, Dick Green WC1M, 11:05
Re: [TowerTalk] Copper wire prices, k6xyz, 10:11
Re: [TowerTalk] Copper wire prices, Bill Gillenwater, 10:04
[TowerTalk] Antenna Masts, AD5VJ Bob, 10:03
Re: [TowerTalk] Copper wire prices, Jeff Goldman, 10:01
Re: [TowerTalk] Copper wire prices, Richard (Rick) Karlquist, 09:53
Re: [TowerTalk] Copper wire prices, Jim Lux, 09:45
Re: [TowerTalk] Aluminum radials, SavageBR, 09:40
Re: [TowerTalk] 160 Meter Antenna Suggestions, WA3GIN in Alex. City, VA, 09:01
Re: [TowerTalk] 160 Meter Antenna Suggestions, WA3GIN in Alex. City, VA, 08:48
Re: [TowerTalk] 160 Meter Antenna Suggestions, Pete Smith, 07:56
Re: [TowerTalk] 160 Meter Antenna Suggestions, ersmar, 07:39
[TowerTalk] 160 Meter Antenna Suggestions, mryan001, 03:33
[TowerTalk] US TOwer TX-472 question, Greg, 01:54

November 17, 2006

[TowerTalk] FS Items Gone, Steve WB6RSE, 23:26
Re: [TowerTalk] Inverting a Delta Loop?, Dennis Watkins, 22:51
Re: [TowerTalk] Copper wire prices, K8RI on TowerTalk, 21:03
Re: [TowerTalk] [rfamplifiers] Lubricating squeaky rotary inductors?, kd4e, 19:02
[TowerTalk] Inverting a Delta Loop?, kd4e, 18:36
[TowerTalk] antenna question, Gregg Seidl, 18:23
[TowerTalk] Aluminum radials, Dennis W0JX, 15:46
Re: [TowerTalk] Aluminum wire radials, Jim Lux, 12:24
[TowerTalk] Aluminum wire radials, Dan Hearn, 10:41
Re: [TowerTalk] Copper wire prices, Bill Turner, 07:59

November 16, 2006

[TowerTalk] Thermite?, WarrenWolff, 20:33
[TowerTalk] thermite Re: Copper wire prices, Jim Lux, 20:25
Re: [TowerTalk] Copper wire prices, K8RI on TowerTalk, 19:49
Re: [TowerTalk] copper wire prices, Rob Atkinson, K5UJ, 18:58
Re: [TowerTalk] Copper wire prices, Jim Lux, 17:46
Re: [TowerTalk] Copper wire prices, Jim Lux, 17:45
Re: [TowerTalk] Copper wire prices, Pat Barthelow, 16:58
Re: [TowerTalk] Copper wire prices, k6xyz, 16:45
Re: [TowerTalk] Copper wire prices, Keith Dutson, 16:26
Re: [TowerTalk] Copper wire prices, Rick Karlquist, 16:26
Re: [TowerTalk] Copper wire prices, Rick Karlquist, 16:24
Re: [TowerTalk] Copper wire prices, Rick Karlquist, 16:22
Re: [TowerTalk] Copper wire prices, Rick Karlquist, 16:18
Re: [TowerTalk] Stainless steel, Brad Pioveson W9FX, 16:04
Re: [TowerTalk] Copper wire prices, Jim Lux, 15:52
Re: [TowerTalk] Copper wire prices, Jim Lux, 15:52
Re: [TowerTalk] Copper wire prices, el34guy, 15:34
[TowerTalk] Stainless steel, Al Toering, 15:19
Re: [TowerTalk] Copper wire prices, k6xyz, 14:43
[TowerTalk] Searching for manual - Mosley TA-36, Mike Miller, 14:27
[TowerTalk] LMR600 crimper, Nick Pair, 11:42
Re: [TowerTalk] Copper wire prices, Peter Dougherty, 11:24
Re: [TowerTalk] Coax Crimp tools/Dies/reasonable cost, Bob Maser, 10:45
[TowerTalk] winch available to a good home, FireBrick, 06:51
Re: [TowerTalk] TH-11DX questions, David J Windisch, 06:00
Re: [TowerTalk] Coax Crimp tools/Dies/reasonable cost, K8RI on TowerTalk, 03:43

November 15, 2006

Re: [TowerTalk] [PVRC] Copper wire prices, Dave Baugher, 22:38
Re: [TowerTalk] Hy-Gain HG-50MT2 rotor mounting, Bob Newton W5RN, 20:11
[TowerTalk] FOR SALE: HAM4 Rotator etc., Steve WB6RSE, 19:29
Re: [TowerTalk] [PVRC] Copper wire prices, Jeffrey Embry, 15:26
[TowerTalk] Hy-Gain HG-50MT2 rotor mounting, Rick, 13:51
[TowerTalk] Copper wire prices, RICHARD BOYD, 12:44
Re: [TowerTalk] Installing and tensioning guywires, K7LXC, 08:58
[TowerTalk] Dunestar 808, Jay Camac, 08:35

November 14, 2006

Re: [TowerTalk] Designing A Window Frame Antenna?, Tom Osborne, 20:30
Re: [TowerTalk] Installing and tensioning guywires, Dick Green WC1M, 19:39
Re: [TowerTalk] [POTENTIAL SPAM] Re: Installing and tensioningguywires, Dick Green WC1M, 19:28
Re: [TowerTalk] Installing and tensioning guywires, Donald Chester, 18:52
Re: [TowerTalk] [POTENTIAL SPAM] Re: Installing and tensioningguywires, Paul Bittner, 18:08
Re: [TowerTalk] Installing and tensioning guywires, K7LXC, 16:01
[TowerTalk] Yaesu Rotor problem, john, 14:37
Re: [TowerTalk] Designing A Window Frame Antenna?, kd4e, 12:11
Re: [TowerTalk] Designing A Window Frame Antenna?, WØQFC, 11:57
Re: [TowerTalk] Designing A Window Frame Antenna?, kd4e, 11:46
Re: [TowerTalk] Designing A Window Frame Antenna?, Geoff Blake, 11:38
[TowerTalk] Yaesu Rotor problem, Magnus A, 11:24
Re: [TowerTalk] Designing A Window Frame Antenna?, WØQFC, 11:03
Re: [TowerTalk] Designing A Window Frame Antenna?, kd4e, 10:34
[TowerTalk] Coax Crimp tools/Dies/reasonable cost, Pat Barthelow, 10:10
Re: [TowerTalk] Designing A Window Frame Antenna?, Clint Talmadge, 10:06
Re: [TowerTalk] Designing A Window Frame Antenna?, Jim Lux, 10:05
[TowerTalk] Designing A Window Frame Antenna?, kd4e, 09:52
[TowerTalk] Loos guage, Thomas Tow, 09:30
[TowerTalk] More Crimp-on UHF connectors - history, Kimo Chun, 08:36
[TowerTalk] Fw: WTS Rohn EF2545, Robin, 08:35
Re: [TowerTalk] Common Mode Chokes, Kimo Chun, 08:35
Re: [TowerTalk] TH-11DX questions, Doug Renwick, 08:13
[TowerTalk] TH-11DX questions, David J Windisch, 06:30
Re: [TowerTalk] Installing and tensioning guywires, Dick Green WC1M, 01:04
Re: [TowerTalk] Loos gage source., K8RI on TowerTalk, 00:40
Re: [TowerTalk] Loos gage source., Chad Kurszewski, 00:19
[TowerTalk] Loos gage source., K8RI on TowerTalk, 00:09
Re: [TowerTalk] Coax Crimp Tool again, K8RI on TowerTalk, 00:07

November 13, 2006

[TowerTalk] W9INN external balun, Garry Drummond, 23:03
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Bill Turner, 22:45
[TowerTalk] test, denis coolican, 22:21
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Gary Schafer, 19:16
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Mike, K6BR, 19:07
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, AA6DX - Mark, 19:05
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Steve Gehring, 19:03
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Gary Schafer, 18:44
Re: [TowerTalk]Solder them thar connections - 1ØØ W Gun for Ten Bux, Jim Lux, 18:38
Re: [TowerTalk] Stainless Steel Source Wanted, Jim Lux, 18:30
Re: [TowerTalk]Solder them thar connections - 1ØØW Gun for Ten Bux, Mike, K6BR, 18:23
[TowerTalk] Solder them thar connections - 1ØØW Gun for Ten Bux, AA6DX - Mark, 17:59
Re: [TowerTalk] Stainless Steel Source Wanted, K8RI on TowerTalk, 17:43
Re: [TowerTalk] Stainless Steel Source Wanted, Clint Talmadge, 17:40
[TowerTalk] Stainless Steel Source Wanted, Dr M J DiGirolamo, 17:30
Re: [TowerTalk] Installing and tensioning guywires, Keith Dutson, 16:20
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, K7LXC, 15:39
[TowerTalk] Installing and tensioning guywires, K7LXC, 15:34
Re: [TowerTalk] Common Mode Choke, Jim Brown, 11:58
[TowerTalk] Common Mode Choke, Kimo Chun, 08:05

November 12, 2006

Re: [TowerTalk] Sensing antenna and feed for maximum tune up, Bob Maser, 22:48
[TowerTalk] Sensing antenna and feed for maximum tune up, p.haire, 22:25
Re: [TowerTalk] vertical vs horizontal--a different take, Jim Lux, 19:03
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, john, 18:23
Re: [TowerTalk] Tensioning guys, K8RI on TowerTalk, 17:00
Re: [TowerTalk] TIC 1122 Fixed, K4RO Kirk Pickering, 15:39
Re: [TowerTalk] vertical vs horizontal--a different take, Gary Schafer, 12:41
Re: [TowerTalk] decoupling feedline from a dipole, Jim Lux, 12:41
Re: [TowerTalk] vertical vs horizontal--a different take, Joe Giacobello, 12:20
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, Michael Tope, 12:08
[TowerTalk] decoupling feedline from a dipole, Jim Miller WB5OXQ, 12:07
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, Mike Fatchett, 11:55
[TowerTalk] WTS Rohn EF2545, Robin, 11:53
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, D. Scott MacKenzie, 11:44
Re: [TowerTalk] vertical vs horizontal--a different take, Jim Jarvis, 11:20
Re: [TowerTalk] vertical vs horizontal--a different take, Bill Turner, 10:09
[TowerTalk] Tensioning guys, Phil Camera, 10:04
Re: [TowerTalk] vertical vs horizontal--a different take, Jim Lux, 09:48
Re: [TowerTalk] vertical vs horizontal--a different take, Rick Karlquist, 09:42
[TowerTalk] Tensioning guys, Dick Green WC1M, 09:31
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, hdmc38, 08:29
Re: [TowerTalk] vertical vs horizontal--a different take, Jim Jarvis, 07:27
Re: [TowerTalk] Shunt fed tower 2, Mike Fatchett, 00:09

November 11, 2006

Re: [TowerTalk] Shunt fed tower 2, K4SAV, 23:50
Re: [TowerTalk] Shunt fed tower 2, K4SAV, 23:18
Re: [TowerTalk] FW: ICON: The Antenna farm, Mike, K6BR, 22:39
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, Michael Tope, 20:40
[TowerTalk] Max Unguyed Rohn 25 height to support dipole end, john, 20:39
Re: [TowerTalk] Vertical Vs Horizontal a different take, kd4e, 20:23
[TowerTalk] Wanted: 1.2GHz Bird Elements, Dr M J DiGirolamo, 20:20
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, D. Scott MacKenzie, 20:19
[TowerTalk] FW: ICON: The Antenna farm, David Robbins K1TTT, 20:18
[TowerTalk] Vertical Vs Horizontal a different take, K8RI on TowerTalk, 20:03
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, Jim Lux, 19:37
Re: [TowerTalk] shunt fed tower, kd4e, 19:02
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, D. Scott MacKenzie, 18:59
Re: [TowerTalk] RE Max Unguyed Rohn 25 height to support dipole end, kd4e, 18:52
Re: [TowerTalk] RE Max Unguyed Rohn 25 height to support dipole end, Merlin-7 KI4ILB, 18:51
[TowerTalk] FOR SALE - UPDATE: HAM 4 Rotators and Control Boxes, Steve WB6RSE, 18:45
[TowerTalk] 300 ohm dipole question, mike l dormann, 17:29
[TowerTalk] RE Max Unguyed Rohn 25 height to support dipole end, Donald Chester, 16:48
[TowerTalk] Shunt fed tower 2, p.haire, 16:08
[TowerTalk] shunt fed tower, Phil Camera, 12:53
[TowerTalk] shunt fed tower, p.haire, 11:32
Re: [TowerTalk] altitude, Joe Giacobello, 11:15
Re: [TowerTalk] Max Unguyed Rohn 25 height to support dipole end, Jim Lux, 00:00

November 10, 2006

Re: [TowerTalk] altitude, Jim Miller, 22:07
[TowerTalk] Max Unguyed Rohn 25 height to support dipole end, KDM, 20:14
Re: [TowerTalk] [SPAM] Re: One more question on PL-259s, Steve Katz, 19:07
Re: [TowerTalk] [SPAM] Re: One more question on PL-259s, Jim Walker, 18:48
Re: [TowerTalk] altitude, W3YY, 18:01
Re: [TowerTalk] Nello tower, Blake Bowers, 16:32
Re: [TowerTalk] altitude, Keith Dutson, 16:28
Re: [TowerTalk] altitude, Joe Giacobello, 16:20
Re: [TowerTalk] altitude, Jim Miller, 16:13
Re: [TowerTalk] Is the Atlas MT-1 Mobile Ant Transformer Good?, Jim Brown, 12:43
[TowerTalk] altitude, Jim Jarvis, 12:22
Re: [TowerTalk] One more question on PL-259s, Jim Lux, 11:13
[TowerTalk] Altitude, Jim Miller, 10:21
[TowerTalk] Need dimensions or manual for M2 SkipLog, David J Windisch, 05:55
[TowerTalk] FOR SALE - HAM 4 Rotators and Control Boxes, Steve WB6RSE, 00:38

November 09, 2006

Re: [TowerTalk] One more question on PL-259s, Mel Whitten, 23:26
Re: [TowerTalk] Urban Contesting, J. Gordon Beattie, Jr., W2TTT, 22:44
Re: [TowerTalk] Interference to CO Alarm, J. Gordon Beattie, Jr., W2TTT, 22:32
Re: [TowerTalk] Restoring antennas ... Is it worth the effort., k6xyz, 20:28
[TowerTalk] Restoring antennas ... Is it worth the effort., Roger Halstead, 20:14
[TowerTalk] C-31XR Jacketed Feed, HFDXJUNKIE, 20:14
Re: [TowerTalk] Alpha 87 amp with LOGGER 32 Software, WA3GIN in Alex. City, VA, 19:38
Re: [TowerTalk] Alpha 87 amp with LOGGER 32 Software, Mike Fatchett, 19:13
Re: [TowerTalk] Restoring Beam Antennas, K8RI on TowerTalk, 18:35
[TowerTalk] Alpha 87 amp with LOGGER 32 Software, mryan001, 17:59
Re: [TowerTalk] TR : Solid state Amp " Expert 1K-FA LinearAmplifier", K8RI on TowerTalk, 17:52
Re: [TowerTalk] One more question on PL-259s, Jim Lux, 16:46
Re: [TowerTalk] Is the Atlas MT-1 Mobile Ant Transformer Good?, k6xyz, 16:14
[TowerTalk] Is the Atlas MT-1 Mobile Ant Transformer Good?, kd4e, 15:04
Re: [TowerTalk] K4AVU Coax Crimper, Bob Maser, 14:58
Re: [TowerTalk] TR : Solid state Amp " Expert 1K-FA LinearAmplifier", K7LXC, 14:18
Re: [TowerTalk] K4AVU Coax Crimper, Terry Dunlap, 14:00
[TowerTalk] K4AVU Coax Crimper, Rick Kourey (K4KL), 13:48
Re: [TowerTalk] One more question on PL-259s, Cecil Moore, 13:30
[TowerTalk] Antenna spacing?, WØQFC, 13:06
Re: [TowerTalk] One more question on PL-259s, Terry Dunlap, 12:21
Re: [TowerTalk] Restoring Beam Antennas, Jim Lux, 10:23
Re: [TowerTalk] Restoring Beam Antennas, Jack - K4WSB, 08:50
Re: [TowerTalk] Restoring Beam Antennas, K7LXC, 08:37
[TowerTalk] TR : Solid state Amp " Expert 1K-FA LinearAmplifier", hermans, 08:10
[TowerTalk] d40, slonim aron, 07:57
Re: [TowerTalk] Coax Crimp Tool, N7KA, 01:26
Re: [TowerTalk] One more question on PL-259s, Dan Hearn, 00:18

November 08, 2006

[TowerTalk] One more question on PL-259s, Bill Turner, 23:43
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 22, Bob Maser, 20:19
Re: [TowerTalk] Coax Crimp Tool, Mel Whitten, 17:01
Re: [TowerTalk] Hygain driven element insulators, Bob Maser, 15:13
[TowerTalk] Nello tower, Vic, 14:48
Re: [TowerTalk] TIC 1122 FIXED, jp, 14:47
Re: [TowerTalk] HyTower Puzzle, NØATH, 13:37
Re: [TowerTalk] TIC 1122 FIXED, Bruce Meier, 13:06
Re: [TowerTalk] Hygain driven element insulators, Bruce Meier, 13:06
Re: [TowerTalk] HYGain Driven element Insulators, Jim Rhodes, 12:28
Re: [TowerTalk] Differential Tuner - Good Idea?, Clint Talmadge, 12:23
Re: [TowerTalk] Differential Tuner - Good Idea?, Peter Chadwick, 12:06
[TowerTalk] Differential Tuner - Good Idea?, kd4e, 11:47
[TowerTalk] HYGAIN HG-70 hd Cables, Bob, 08:16
[TowerTalk] low band book suggestions, Craig Clark, 07:55
Re: [TowerTalk] HyTower decoupling stub question, Bill Winkis, 07:33
Re: [TowerTalk] HyTower Puzzle, Bill Winkis, 07:21
Re: [TowerTalk] HyTower Puzzle, Bob Maser, 07:05
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 22, Nick Pair, 02:52
[TowerTalk] HyTower Puzzle, k6xyz, 00:33
Re: [TowerTalk] TIC 1122 Fixed, Tyler Stewart, 00:14

November 07, 2006

Re: [TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), Jim Lux, 23:53
[TowerTalk] Hy Tower puzzle, Robert Nickels, 23:50
Re: [TowerTalk] HYGain Driven element Insulators, mryan001, 23:40
[TowerTalk] HYGain Driven element Insulators, Bob Maser, 22:52
[TowerTalk] TIC 1122 Fixed, john, 22:23
[TowerTalk] HyTower decoupling stub question, K9AJ, 21:58
Re: [TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), Bill Turner, 21:11
[TowerTalk] Coax Crimp Tool, Al nsixtez, 21:11
Re: [RFI] [YCCC] Interference to CO Alarm, Jim Brown, 19:48
Re: [TowerTalk] LMR-600 crimp connectors (N or 7/16) and tool?, Dave NØRQ, 17:54
Re: [TowerTalk] TIC 1122 Fixed, K8RI on TowerTalk, 17:41
[TowerTalk] LMR-600 crimp connectors (N or 7/16) and tool?, K8RI on TowerTalk, 17:37
Re: [TowerTalk] RG8X Stripping tool ?, Jim Lux, 16:26
Re: [TowerTalk] PL259 crimp-ons for TV cable, Jim Lux, 16:21
Re: [TowerTalk] Christmas scene antenna project, Jim Lux, 16:15
Re: [TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), Jim Lux, 16:15
[TowerTalk] RG8x strip tool, Ed Laughery, 14:51
Re: [TowerTalk] PL259 crimp-ons for TV cable, Bob Nielsen, 14:51
[TowerTalk] RG8X Stripping tool ?, Ed Laughery, 14:49
[TowerTalk] PL259 crimp-ons for TV cable, K4SAV, 14:07
[TowerTalk] Ok - Crimp type coax - can you explain it or a web pagehow to?, Peter Dougherty, 13:47
[TowerTalk] Christmas scene antenna project, Greenacres113, 13:22
Re: [TowerTalk] TIC 1122 Fixed, Keith Dutson, 12:00
[TowerTalk] tinning braid, Craig Clark, 11:56
Re: [TowerTalk] Ok - Crimp type coax - can you explain it or a webpagehow to?, Pat Barthelow, 11:19
[TowerTalk] Ok - Crimp type coax - can you explain it or a web pagehow to?, w7psk, 11:00
Re: [TowerTalk] Urban Contesting, Jim Brown, 10:07
Re: [TowerTalk] TIC 1122 Fixed, Tim Duffy K3LR, 09:57
[TowerTalk] BXI Towers, Adrian Rees, 09:56
Re: [TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), NLT6565, 09:25
[TowerTalk] TIC 1122 Fixed, Dennis OConnor, 08:23
[TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), Dennis OConnor, 08:13
Re: [TowerTalk] re Soldering PL259s, Peter Chadwick, 03:15
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 18, Peter Dougherty, 00:41
[TowerTalk] re Soldering PL259s (Rob Atkinson, K5UJ), Peter Dougherty, 00:25
Re: [TowerTalk] re Soldering PL259s -- What I do, Tim Duffy K3LR, 00:05
Re: [TowerTalk] TIC 1122 Fixed, Tyler Stewart, 00:02

November 06, 2006

[TowerTalk] Installers, Jerry Keller, 23:56
Re: [TowerTalk] Soldering PL259s - What I do, Tyler Stewart, 23:52
Re: [TowerTalk] re Soldering PL259s, Mike, 23:25
[TowerTalk] re Soldering PL259s -- What I do, Rob Atkinson, K5UJ, 22:57
Re: [TowerTalk] Soldering PL259s - What I do, Tim Duffy K3LR, 21:38
Re: [TowerTalk] Soldering PL259's, Dr M J DiGirolamo, 21:17
Re: [TowerTalk] Soldering PL259s - What I do, NØATH, 20:42
Re: [TowerTalk] Soldering PL259s - What I do, steveac, 20:21
[TowerTalk] TIC 1122 Fixed, Bruce Meier, 19:13
[TowerTalk] Help Identify this Tower, BRENT BAUM, 18:48
Re: [TowerTalk] Soldering PL259s - What I do, NLT6565, 18:10
Re: [TowerTalk] Soldering PL259s - What I do, Tim Duffy K3LR, 17:57
Re: [TowerTalk] Interference to CO Alarm, Kelly Johnson, 17:49
Re: [TowerTalk] Urban Contesting, Keith Dutson, 17:36
Re: [TowerTalk] Interference to CO Alarm, Jim Lux, 17:24
Re: [TowerTalk] re Soldering PL259s, Ian White GM3SEK, 17:14
Re: [TowerTalk] Urban Contesting, D. Scott MacKenzie, 17:06
Re: [TowerTalk] Urban Contesting, Charles Gallo, 16:49
Re: [TowerTalk] re Soldering PL259s, Pete Smith, 16:48
Re: [TowerTalk] Urban Contesting, David Robbins K1TTT, 16:36
[TowerTalk] Urban Contesting, James Hadlock, 16:18
Re: [RFI] [YCCC] Interference to CO Alarm, David Robbins K1TTT, 16:05
Re: [TowerTalk] re Soldering PL259s, Pat Barthelow, 16:01
[TowerTalk] Interference to CO Alarm, k2qmf, 15:43
Re: [TowerTalk] re Soldering PL259s, Keith Dutson, 15:34
[TowerTalk] re Soldering PL259s, Rob Atkinson, K5UJ, 13:21

November 05, 2006

[TowerTalk] Soldering PL259s Help Silver based solder, Rick Scott, 20:28
[TowerTalk] FS MFJ1701 Ant Switch, Steve Lawrence, 19:10
[TowerTalk] FS MFJ1701 Ant Switch, Steve WB6RSE, 19:10
Re: [TowerTalk] Inverted v vs dipole at different heights, K4SAV, 19:02
Re: [TowerTalk] Inverted v vs dipole at different heights, K4SAV, 18:15
Re: [TowerTalk] 2m/70cm beam on HF Tribander boom, Todd Coulter, 17:50
[TowerTalk] Inverted v vs dipole at different heights, Jim Miller WB5OXQ, 17:15
Re: [TowerTalk] New F12 40M yagi, bob finger, 13:44
[TowerTalk] New F12 4M yagi, K7LXC, 13:37
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Michael Tope, 12:54
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, K4SAV, 11:52
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Jim Lux, 09:36
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Rick Karlquist, 02:34

November 04, 2006

[TowerTalk] Questions about Irrigation Pipe for Verticals, Pat Chiles, 16:15
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Jim Lux, 15:14
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Rick Karlquist, 14:33
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Rick Karlquist, 14:26
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, K8RI on TowerTalk, 14:03
[TowerTalk] CI-V rig control / SteppIR computer control, Bruce Phegley, 14:00
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, D. Scott MacKenzie, 11:50
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Jim Lux, 11:49
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Bill Turner, 11:05
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Bob Maser, 09:17
[TowerTalk] lead free solder, Craig Clark, 08:59
Re: [TowerTalk] Homebrew Tower for 500lbs load help needed, john . brewer, 07:37
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Rick Karlquist, 02:18

November 03, 2006

Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Red, 23:45
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Red, 23:31
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Gary Schafer, 23:01
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Red, 20:46
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Rick Karlquist, 15:45
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Marlon K. Schafer (509) 982-2181, 14:02
[TowerTalk] Solder, jacobsen_5, 14:00
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, k1xx, 12:51
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Bob Maser, 12:47
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, Terry Dunlap, 12:18
Re: [TowerTalk] Questions about Irrigation Pipe for Verticals, donhall161, 12:07
Re: [TowerTalk] Homebrew Tower, John Barrett, 10:49
[TowerTalk] Questions about Irrigation Pipe for Verticals, Pat Chiles, 10:28
Re: [TowerTalk] Homebrew Tower for 500lbs load help needed, Pat Barthelow, 09:14
[TowerTalk] Homebrew Tower, Phil Camera, 09:10
Re: [TowerTalk] TowerTalk Digest, Vol 47, Issue 7, Dudley Chapman, 09:03
Re: [TowerTalk] Homebrew Tower for 500lbs load help needed, Clint Talmadge, 08:45
Re: [TowerTalk] Homebrew Tower for 500lbs load help needed, John Barrett, 03:19
Re: [TowerTalk] Homebrew Tower for 500lbs load help needed, Jim Lux, 00:06

November 02, 2006

Re: [TowerTalk] "A Horizontal Loop for 80 Meter DX", D. Scott MacKenzie, 23:52
[TowerTalk] "A Horizontal Loop for 80 Meter DX", TOMMY HALIBURTON, 21:52
[TowerTalk] Homebrew Tower for 500lbs load help needed, John Barrett, 21:49
Re: [TowerTalk] Restoring Beam Antennas, Mel Whitten, 20:25
Re: [TowerTalk] 75m wire beam, Peter Voelpel, 18:17
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, K4SAV, 17:51
Re: [TowerTalk] Restoring Beam Antennas, Orcena Lyle, 17:47
Re: [TowerTalk] 160m Receive Antenna, Rick Karlquist, 17:43
Re: [TowerTalk] Inverted Vee vs. Dipole QRN, Rick Karlquist, 17:38
[TowerTalk] Inverted Vee vs. Dipole QRN, Kelly Johnson, 16:59
Re: [TowerTalk] 160m Receive Antenna, John Wagner, 16:53
Re: [TowerTalk] 160m Receive Antenna, Peter Voelpel, 16:52
Re: [TowerTalk] 160m Receive Antenna, Roger Parsons, 16:43
Re: [TowerTalk] Restoring Beam Antennas, WØQFC, 11:58
Re: [TowerTalk] Winch cable for a LM354, k2qmf, 10:45
Re: [TowerTalk] Winch cable for a LM354, k2qmf, 10:43
Re: [TowerTalk] Restoring Beam Antennas, jacobsen_5, 10:34
Re: [TowerTalk] Declination Question (True North), Andrew Roos, 08:48
Re: [TowerTalk] 75m wire beam, w4ZW, 07:16
Re: [TowerTalk] Winch cable for a LM354, K7LXC, 00:15
Re: [TowerTalk] Declination Question (True North), Tim Duffy K3LR, 00:00

November 01, 2006

[TowerTalk] Big Grip guy wire ends, Phil Camera, 23:05
Re: [TowerTalk] Winch cable for a LM354, Bob Maser, 22:56
Re: [TowerTalk] Winch cable for a LM354, AI2C - Norm Styer, 22:51
[TowerTalk] Restoring Beam Antennas, Dr M J DiGirolamo, 22:38
[TowerTalk] Big Grip guy wire ends, Allen Griffith, 22:21
Re: [TowerTalk] Winch cable for a LM354, Doug Rehman, 22:20
Re: [TowerTalk] Winch cable for a LM354, KJ6Y, 22:09
Re: [TowerTalk] Declination Question (True North), Pat Barthelow, 22:06
[TowerTalk] Reverse engineering..., PAUL924, 21:40
[TowerTalk] Declination Question (True North), john, 21:11
Re: [TowerTalk] Winch cable for a LM354, Bob Maser, 20:44
Re: [TowerTalk] Winch cable for a LM354, Bob Maser, 20:32
Re: [TowerTalk] 75m wire beam, mike l dormann, 20:20
Re: [TowerTalk] 75m wire beam, w4ZW, 19:48
Re: [TowerTalk] Winch cable for a LM354, KJ6Y, 19:46
[TowerTalk] vertical, Larry stowell, 19:43
Re: [TowerTalk] M2 40M3FS-125 fix, Dino Darling, 19:07
[TowerTalk] thanks for answer abt Gladiator, LA6FJA/K3RAG Stein Roar Brobakken, 17:36
[TowerTalk] Antenna question(s), WØQFC, 17:13
Re: [TowerTalk] 2 Meter Antenna Mounted on a 160 Meter Vertical, Dan Hearn, 16:48
[TowerTalk] M2 40M3FS-125 fix, Scott W3TX, 16:46
Re: [TowerTalk] Winch cable for a LM354, Bob Maser, 16:45
Re: [TowerTalk] 75m wire beam, K7LXC, 16:42
Re: [TowerTalk] Tower Newbie (Grand Rapids, MI), K7LXC, 16:42
[TowerTalk] length of inverted Ell, Jim Jarvis, 16:41
Re: [TowerTalk] Winch cable for a LM354, K7LXC, 16:40
[TowerTalk] The Birds and the Bees, Feedlines and Trees, K8fu, 15:51
[TowerTalk] The Birds and the Bees, Feedlines and Trees, K8fu, 15:47
Re: [TowerTalk] 2m/70cm beam on HF Tribander boom, Dan Zimmerman, 15:18
Re: [TowerTalk] 2m/70cm beam on HF Tribander boom, Dan Zimmerman N3OX, 15:00
[TowerTalk] 160 Meter Receive Loop, Thomas Giella KN4LF, 12:34
Re: [TowerTalk] 160m Receive Antenna, Phil Camera, 12:15
[TowerTalk] 2 Meter Antenna Mounted on a 160 Meter Vertical, Phil Clements, 11:57
Re: [TowerTalk] 160m Receive Antenna, Bill Tippett, 10:30