Towertalk
[Top] [All Lists]

Re: [TowerTalk] Orion OR2800P

To: "Bob Maser" <bmaser@tampabay.rr.com>,"K8RI on TowerTalk" <K8RI-on-TowerTalk@tm.net>,<TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Orion OR2800P
From: "Chuck O'Neal" <cdoneal@comcast.net>
Date: Tue, 21 Nov 2006 19:42:12 -0500
List-post: <mailto:towertalk@contesting.com>
Go to this site:

http://www.prosistel.net/home-e/default.html

and on the left there is a rotator comparison link.  While this is the
Prosistel site, the table shows the Orion 2800 along with a bevy of other
rotators and their specs.  For a big antenna, I'd go with the Prosistel
PST-71 or a prop pitch.

Chuck...K1KW



----- Original Message ----- 
From: "Bob Maser" <bmaser@tampabay.rr.com>
To: "K8RI on TowerTalk" <K8RI-on-TowerTalk@tm.net>;
<TOWERTALK@contesting.com>
Sent: Tuesday, November 21, 2006 7:15 PM
Subject: Re: [TowerTalk] Orion OR2800P


> Check out this M2 website:
>
> http://www.m2inc.com/products/rotors/or28002.html
>
> Bob W6TR
> ----- Original Message ----- 
> From: "K8RI on TowerTalk" <K8RI-on-TowerTalk@tm.net>
> To: <TOWERTALK@contesting.com>
> Sent: Tuesday, November 21, 2006 7:02 PM
> Subject: [TowerTalk] Orion OR2800P
>
>
> >I have spent the last hour searching for information on the Orion OR2800P
> > rotator.  All I found were opinions such as "I like it", "built like a
> > tank", etc...but absolutely no information on how it's constructed, or
the
> > actual mechanics of the thing.  I did find one photo of the assembled
unit
> > which doesn't even show scale.
> >
> > Would some one please describe the insides for me?  What do they use for
> > load supporting bearings, what kind of gears, are they spur or worm
gear.
> > If
> > worm gear is a single or double reduction. What do they use for a brake
if
> > not a dual worm gear?
> >
> > If you need parts how long to get them? What kind of service and turn
> > around
> > time. Are there any parts that are a long delivery item?
> >
> > Are parts readily available for the controllers.
> >
> > For me it's not just how well an item works but how well it's supported
> > and
> > whether parts are standard and readily obtainable. Standard, readily
> > obtainable parts is second only to "is the rotator adequate to do the
job
> > with a substantial safety margin".
> >
> > For large arrays like my system (there are *much* larger systems out
> > there)
> > I want the speed to either step up and down or smoothly increase and
> > decrease at the beginning and end of any movement.
> >
> > Roger Halstead (K8RI and ARRL 40 year Life Member)
> > N833R - World's oldest Debonair CD-2
> > www.rogerhalstead.com (Use return address from home page)
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>