Jim, I stongly suggest that you check with Press Jones at The Wireman, Inc.
He has both 6- and 8-pole, polarized, weatherproof trailer connections that
offer themselves nicely for rotor disconnects.
http://thewireman.com/prodpix6.html They are quite reasonably priced, too -
only a fraction of the cost of some of the alternatives.
I second the notion that Cinch-Jones connectors - and, round Amphenol
connectors, for that matter - don't belong in rotors or rotor cables that
are outdoors. Waterproofing is mandatory but very difficult to effectively
achieve.
73, Brad, W9FX
----- Original Message -----
From: "Jim McDonald" <jim@n7us.net>
To: <towertalk@contesting.com>
Sent: Tuesday, November 21, 2006 2:13 PM
Subject: [TowerTalk] Source of 6/8 pin connectors?
> Does anyone have any suggested sources for Cinch-Jones (or whatever) plug
> and socket sets for rotor control or whatever? I'm thinking 6 or 8 pins.
> Part numbers would be helpful. I looked at Mouser but am not sure of
> manufacturer/part. Thanks.
>
>
>
> Jim N7US
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|