Remember that beamwidth is definded as the points where the signal drops
3dB's from the main lobe. After this point the signal does not drop to
zero. In many cases the signal strength of a large yagi will still be equal
or greater than a smaller yagi beyond the big yagi's 3dB bandwidth.
John KK9A
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Two 15M stacking
From: <donovanf@starpower.net>
Date: Sun, 25 Feb 2007 14:53:00 -0500 (EST)
List-post: <mailto:towertalk@contesting.com>
>From Maryland, a 45 degree beamwidth will simultaneously cover the
following areas with large contester populations:
Azimuth Coverage area
22-25 UA4 and UA9 zone 17
22-30 Northern LA OH9 SM2 UA1Z
30-60 Continental Europe (DL, G, F, HA, HB, I, OK, SP, UA, YU etc)
60-68 Iberian Peninsula (CT1, EA)
Its wise to include in a few degrees of additional beamwidth for small beam
pointing errors, pattern assymetry and skewed propagation paths.
50 degree beamwidth is a good choice, requiring boom lengths of one
wavelength
or less.
73!
Frank
W3LPL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|