At the rotator put large mov's on each wire to case ground. Put a large
heavy flexible wire from the top of the rotator case to the bottom plate of
the rotator (with a loop so it can rotate) to bypass the moving joint in it.
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Matt Patterson
> Sent: Saturday, April 26, 2008 10:25 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] rotor and indirect lightning
>
> Guys,
>
> Any suggestions on how to best protect a rotor from indirect lightning
> strikes? In the past two months I have suffered two indirect lightning
> strikes and in both cases it has taken out the reed switch in my M2
> Orion 2800. I have a spare but it's getting expensive having the guy
> come out and swap them out. Just curious what others do to help protect
> their rotors. I know there nothing that's going to protect it 100% of
> the time but if there's something I can do to lessen the chance of
> something like this happening again I'm all for it.
>
>
> 73 Matt
> W5LL
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|