The end with the contact screw for the body to element junction is
nearest the boom.
73 Dave n4zkf
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Ray' Email
Sent: Tuesday, July 15, 2008 10:54 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Cushcraft A3S trap question
All,
I just purchased a used Cushcraft A3S w/40m element and am in the process of
taking it apart to clean the corrosion and oxidation built up on it.
I have run across a problem, One or more of the 10m traps may have been
installed incorrectly. The arrows indicating the boom direct are long gone,
so I have no way of telling what direct they need to be re-installed. I do
see that one end the aluminum tubing sticking out of the trap measures 3?,
while the other is 2 ½? long.
Does anyone know which end, the long or short end of the trap goes to the
boom?
Thanks,
Ray,
N6VR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|