Bill
Agree with you, have used that know in several - hundreds of works-
commercial repeater antennas, mast, brackets, hard line ,gin poles, etc etc
But if you have not much experience using it, a fail can be very probable, in a
heavy mast with not much experience people using a specific knot will use my
common sense like i use it trying something new, safety first.
Happy New Year 2009 to all.
Hector Garcia XE2K / XF1K
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
--- On Mon, 12/29/08, Bill Gillenwater <gillie@pa.net> wrote:
From: Bill Gillenwater <gillie@pa.net>
Subject: Re: [TowerTalk] Knot tying
To: "Drax Felton" <draxfelton@gmail.com>, towertalk@contesting.com
Date: Monday, December 29, 2008, 7:28 PM
Half-hitches have always worked for me. Masts up to 24 feet and weighing
over 200 lbs.
73 Bill K3SV
----- Original Message -----
From: "Drax Felton" <draxfelton@gmail.com>
To: <towertalk@contesting.com>
Sent: Monday, December 29, 2008 12:19 PM
Subject: [TowerTalk] Knot tying
> Does anyone know what knot would be best for lifting a mast pipe up and
into
> the rotor using a gin pole?
> I need something that won't let the pipe slip through, but I also
don't
want
> a hole, or something difficult to untie.
>
> KB3X
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|