Towertalk
[Top] [All Lists]

Re: [TowerTalk] Co-ax and Rotor Control cables inside PVC?

To: "Cal Zethmayr" <w4gmh@cox.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Co-ax and Rotor Control cables inside PVC?
From: "Paul Playford" <paul@w8aef.com>
Date: Mon, 6 Apr 2009 10:21:32 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thin wall PVC is good for about a year in the Arizona sun.

de Paul, W8AEF

ZF2JI/ZF2TA  FO8DX/FO8PLA  8Q7AA  XZ0A  VU7RG  TX5C



----- Original Message ----- 
From: "Cal Zethmayr" <w4gmh@cox.net>

> Considering installing some thin wall PVC pipe inside one corner of the 
> tower from near the bottom to the area at the top where the rotor, and an 
> Ameritron coax switch box will be mounted.  Then put one run of LMR400 in 
> it, the cables for the rotor and switch box control.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>