Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antennas at 45° [was Gizmotchy's]

Subject: Re: [TowerTalk] Antennas at 45° [was Gizmotchy's]
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Thu, 09 Apr 2009 16:22:30 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Larry Banks wrote:
> Hi Jim,
>
> Good idea.
>
> One of the reasons I went with 45° is that I did not want the vertical mast 
> to ruin the antenna pattern, which happens when the mast goes though the 
> yagi, or even if the yagi is at the end of the mast.  How did you prevent 
> this problem?
>   

I took the easy way out: I attached a cross boom to the mast and mounted 
a vertically polarized Yagi at each end.
This works well with even 3 or 4L yagis and is a relatively inexpensive 
solution.   I prefer a 2-way power divider, but a coax matching harness 
is relatively easy to build.

73

Roger (K8RI)
> 73,
> Larry
> W1DYJ
>
>
> ----- Original Message ----- 
> From: "Jim Hargrave" <w5ifp@gvtc.com>
> To: "Towertalk" <towertalk@contesting.com>
> Sent: Thursday, April 09, 2009 3:18 PM
> Subject: Re: [TowerTalk] Gizmotchy's
>
>
>
>
>    >-----Original Message-----
>    >From: towertalk-bounces@contesting.com
>    >[mailto:towertalk-bounces@contesting.com]On Behalf Of Larry Banks
>    >Sent: Thursday, April 09, 2009 16:19
>    >To: Dan Zimmerman N3OX; towertalk@contesting.com
>    >Subject: Re: [TowerTalk] Gizmotchy's
>    >
>    >
>    >Hi Dan,
>    >
>    >You said this far better that I did!  Thanks for the better explanation.
>    >
>    >For the record, I used a 2M yagi at 45° for a few years to "optimize"
>    >(compromise?) both SSB and FM.  Worked.  Turned out is was great for
>    >directing Fox Hunts -- with the tricks the foxes did.
>    >
>    >73 -- Larry -- W1DYJ
>
> Larry,
>
> I have a better idea. I have a 14 element Hygain 2m beam. I installed a TV
> antenna rotor mounted horizontal at the midpoint of the Boom and rotate the
> beam vertical for FM and horizontal for SSB and anywhere in between for
> possible phasing. I modified the rotor and installed limit switches and do
> not use a control box. I just added a On/OFF/ON switch to the my main
> controller. It has operated great for the past 20 years.
>
>    * 73's Jim W5IFP *
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>