Brian Gieryk wrote:
> Perhaps a typo on their site, or an oversight, but how cane one have a
> turning radius (20 ft, 1 in.) LESS than the boom length (20 ft, 6 in.)?
>
> Brian
> KE6IYC
>
>
You're going to feel silly, when you realize it
radius = half diameter...
just the 20 foot boom has a 10ft turning radius..
What the 20 ft radius means is that the element length is approximately
2* sqrt(20^2-10^2)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|