TT's
Where can read or get the information how much change in the SQ FT Rate if
the top good guy have the torque arm stabilizer with the 6 guys will give
the same 60ft 25g ?
I think that tower will handle a bigger tribander or big LOG Periodic plus
the 2 ele 40m antenna on TOP with that set up, but will like to have the
numbers.
J. Hector Garcia XE2K / WT6J
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org
--- On Tue, 8/18/09, K7LXC@aol.com <K7LXC@aol.com> wrote:
From: K7LXC@aol.com <K7LXC@aol.com>
Subject: [TowerTalk] R25G vs. large antenna
To: towertalk@contesting.com
Date: Tuesday, August 18, 2009, 6:31 PM
Howdy, TowerTalkians --
This thread contained lots of anecdotal information and I found it
surprising that NO ONE mentioned what the tower spec from the manufacturer is.
Sixty feet of 25G (I think that was the height of interest) is rated
for 16.9 square feet @ 70 MPH, 10.2 sq.ft. @ 90 MPH and 8.2 sq.ft. @ 110
MPH. In any case it looks like you're covered.
In the future, _www.rohnnet.com_ (http://www.rohnnet.com) has an
online catalog with these specs. And as always, follow the LXC Prime Directive
to "DO what the manufacturer says."
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|