Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hustler 5BTV Problem

To: Alan Swinger <awswinger@earthlink.net>, "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] Hustler 5BTV Problem
From: Jim Lux <jimlux@earthlink.net>
Reply-to: Jim Lux <jimlux@earthlink.net>, "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Wed, 20 Jan 2010 17:31:09 -0800 (GMT-08:00)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>


-----Original Message-----
>From: Alan Swinger <awswinger@earthlink.net>
>Sent: Jan 20, 2010 4:34 PM
>To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
>Subject: Re: [TowerTalk] Hustler 5BTV Problem
>
>Try changing the length of your coax since you are close to a half wave on 
>40M. Also, its a good idea to use a choke on both the ant and shack ends of 
>the coax so it does not try to act as part of the radial system. By choke, I 
>mean 12 turns (or so) on std black drain hose (about 5 in in dia) or other 
>suitable form. I am sure you will get lots of other advice, but feedline 
>length is an obvious (and simple to fix) one.


I use 5 2.4" diameter 31 mix cores with a half dozen turns through it as a 
choke on most all vertical antennas and find that it really kills the feedline 
interactions. Makes tuning MUCH easier.  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>