Hi all,
In further discussion of RF Industries connectors, solder or crimps, die sizing
and conductor strip lengths, the following
may be useful to you. Also, these die sizes and dimensions often will be the
same for connectors other than RFI's, but if any doubt, a double check usually
can be found on the other mfr. web sites, such as Amphenol, Kings, etc. (we
also carry Amphenol).
See the "RFI Assembly Guide" on our site at:
http://www.davisrf.com/articles/index.php
By the way, I am looking for interesting RF tech and ham web sites to note as
"Interesting Links" on our DavisRF.com site. Also any RF commercial interesting
sites...if you have one or a few favorite sites, would greatly appreciate any
referrals to same. Been years since we updated our link page, and it is
sorely lacking now. This request might best be responded directly to me vs.
a TT posted topic, but use your judgement, and Steve's guideline.
Cheers, 73, Steve, K1PEK cc: Steve, K7LXC
Davis RF Company
Davis-Orion Marine Cable
-Electronic Wire, Cable
-Cable Design Engineering
-RF Coaxial Cable Connectors and
Telecom Parts
A Division of Orion Wire Company, Inc.
www.DavisRF.com
Main office, NH: Tel: 1-800-DAVIS RF (800-328-4773)
Steve Davis, Direct line, MA Branch: 1-978-369-1738 sdavis@DavisRF.com
On Apr 21, 2010, at 1:47 PM, Stephen Davis wrote:
>
> Hi Guys, RF Industries does make UHF male and female for LDF4 Heliax (will
> also work for RFS, Eupen and others). Davis RF is a distributor for RF Ind.
> Last I knew, your price with us will be less than if you contact RFS
> directly , same should be true for any connectors they sell. And, we'd much
> appreciate your biz.
>
> RFU-502-H1 male and RFU-520-H1 female.
> Go to our page for a picture and details:
> http://www.davisrf.com/pdfs/uhf-connectors.pdf
>
> Feel free to contact me. Yes, I'm connected, biased and fully proud of our
> reputation, HI,
>
> 73, Steve, K1PEK
> Please include all email history in responses until your inquiry or order is
> completed
>
> Davis RF Company
> Davis-Orion Marine Cable
> -Electronic Wire, Cable
> -Cable Design Engineering
> -RF Coaxial Cable Connectors and
> Telecom Parts
> A Division of Orion Wire Company, Inc.
> www.DavisRF.com
>
> Main office, NH: Tel: 1-800-DAVIS RF (800-328-4773)
> Steve Davis, Direct line, MA Branch: 1-978-369-1738 sdavis@DavisRF.com
>
>
>
> john@kk9a.com
>
>
>>
>>>
>>> Ryan Jairam wrote:
>>>> I would just get N connectors and adapters and use that instead.
>>>> Practically nobody else but ham and CB use UHF connectors anymore.
>>>>
>>> To me the UHF are preferable to the N for HF if you run power and a high
>>> SWR. ?I look at N as a mistake. ?If I didn't have so may connectors
>>> already installed I'd go with the 7-16 DIN which might even be cheaper
>>> now days.
>>>
>>> I've never noted any difference up through 2-meters although others
>>> have. What we did different? I have no idea.
>>>
>>> 73
>>>
>>> Roger (K8RI)
>>>> Vy 73
>>>>>
>>>>> .
>>>>> If anyone does have any L44P or L44U connectors that they would like to
>>>>> get
>>>>> rid of for a more reasonable price, please send me a direct email
>>>>>
>>>>> John ?john@kk9a.com
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Also RF Industries
>>>>> (RFI) makes a UHF male for LDF4 if I'm not mistaken.
>>>>>
>>>>> 73,
>>>>>
>>>>> --
>>>>> Steve Maki
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|