Towertalk
[Top] [All Lists]

Re: [TowerTalk] Antenna switching board ?

To: "'Paul Young'" <paul@g0hwc.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Antenna switching board ?
From: "Allen R. Brier" <n5xz@earthlink.net>
Reply-to: n5xz@earthlink.net
Date: Tue, 15 Jun 2010 13:51:34 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Why not remote control it with a PLC or computer control?

Allen Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77406-2533
281-342-1882
713-705-4801 (Cell)
n5xz@arrl.net-----Original Message-----
From: Paul Young [mailto:paul@g0hwc.com] 
Sent: Tuesday, June 15, 2010 8:39 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Antenna switching board ?

Hi all,
I am in the middle of converting my garage into a radio shack 
Photos here: http://www.g0hwc.com/latest_projects.html
I am going to be building a consol to fit all my radio gear into
and I have been thinking about antenna / radio / amp coax
switching. I was thinking of making a panel with SO239's on the
front and wired direct to each radio, amp, antenna and have a bunch
of patch leads that I could move around. Anyone else got any better
ways of doing it ?  I have 5 antennas, 2 amps and 4 radios.
  
Paul G0HWC
Truck Cam: http://www.truckcam.tv
See live images from my truck with APRS tracking
Skype:  paul.g0hwc

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>