Towertalk
[Top] [All Lists]

Re: [TowerTalk] what comes with Yaesu 2800 rotor ???

To: towertalk towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] what comes with Yaesu 2800 rotor ???
From: GALE STEWARD <k3nd@yahoo.com>
Date: Wed, 30 Mar 2011 11:49:54 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Some of the guys have used the following hardware to cure the mast slipping 
issue.If I was going to install a 2800, I'd seriously consider this.


http://www.championradio.com/Orion-2800-Replacement-Mast-Clamp.44









----- Original Message ----
From: Mike & Becca Krzystyniak <k9mk@flash.net>
To: Charles Harpole <k4vud@hotmail.com>; towertalk towertalk 
<towertalk@contesting.com>
Sent: Wed, March 30, 2011 2:31:13 PM
Subject: Re: [TowerTalk] what comes with Yaesu 2800 rotor ???

Charles,

   I recently bought a spare G-2800DXA from Yaesu as a spare.  In outward
appearance it looks the same as the SDX. The DXA manual is on the
Yaesu-Vertex site.  The rotor package comes complete with 40M (~130') of
cable and connectors for each end.  All the hardware is painted (or maybe
its powder coat).  I do not recall any stainless.

   I think the SDX was an older discontinued model.  I am using a SDX with a
Mosley Pro67C3.  Although not a long boom antenna it is very heavy and along
with a couple thrust bearings this rotor yawns when it turns.  The only
weakness I had was it slipped at the mast clamp in a wind storm. So I went
back and added the infameous 5th bolt essentially pinning the rotor brackets
to the mast.  No more slips...  

73's Mike K9MK


  

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Charles Harpole
Sent: Wednesday, March 30, 2011 5:00 AM
To: towertalk towertalk
Subject: [TowerTalk] what comes with Yaesu 2800 rotor ???


If u have purchased a new sealed box of a Yaesu G-2800SDX rotor, please tell
me

1.  What is the complete list of what comes standard in the box,
specifically any 6-wire cable, and any stainless bolts???

2.  What does the SDX indicate, mean?

3.  Anyone used the GA-3000 Tower Shock Absorber Joint???

4.  Any other tips in using this rotor???

Thanks, 73

Charles Harpole
k4vud@hotmail.com 

                          
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>