I don't like using barrel connectors and adding two PL-259's or other
connector in line. To me it is adding a potential source of a problem at the
most inopportune time.
I use the ICE 360/380 brackets from ICE. Not sure if still available.
Probably can make your own.
For the 7/8" hardline I used a Polyphaser low inductance grounding kit for
the shield. When I got mine the strap was SS.
After using them for 17 years I took them apart to check. Shields are still
shiny new.
73,
N2TK, Tony
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of John Becker
Sent: Monday, June 20, 2011 3:41 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Lightning arrestor in towers
> Also bond all of
> your cables at the top and bottom of the tower.
>
> 73
> Gary K4FMX
>
What is the best way to do this and still keep water out of the cable?
73,
John, K9MM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|