Hi Jim, you likely already make your own. It will be hard to beat a DIY
adapter made with a short length of RG213 or LMR400 and N female one end/ UHF
male other end.
You will need to upgrade your standard if you ever operate above 6m with
significant power.
73,
Gerald K5GW
In a message dated 12/24/2011 3:46:19 P.M. Central Standard Time,
jim@audiosystemsgroup.com writes:
On 12/24/2011 1:35 PM, Jim W7RY wrote:
> The only problem with 7/16 is the availability and price of them for
RG-8 or
> other flexible cable. N connectors for RG-8 sized cable are dirt cheap!
My standard RF connector is UHF, and I adapt everything else to it.
I've been able to buy Amphenol adapters with a male N and female UHF,
but have not found Amphenol adapters with female N and male UHF. Yes, I
can find cheap junk adapters, but they fall apart and are cheaply made,
often with tiny center conductors.
Does any know of a source for good quality N female to UHF male?
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|