Tyco/Shrack RTB14012. 12vdc relays or Tyco/Shrack RTB14024 fer 24vdc
relays relays
Quoting Jim Miller <jim@jtmiller.com>:
> Thanks for all the good suggestions. The relays will be to remotely
> configure a windowline-fed dipole between "normal" configuration and a
> "vertical" configuration which results in the windowline wires being tied
> together and worked against a radial field. Right now that involves me
> tromping out to the woods to move wires around. I've got control lines
> pulled in parallel with the coax going out to the tuner that sits on the
> other side of the configuration point so that's not a problem. I'm looking
> forward to being able to do this from a switch in the shack.
>
> I'm thinking that I'll put the relays in sockets to allow for easy
> replacement.
>
> Not the world's greatest antenna but the best I can do for now in my space
> limited, stealth (HOA) situation.
>
> 73
>
> jim ab3cv
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|