Towertalk
[Top] [All Lists]

Re: [TowerTalk] Temp tower idea

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Temp tower idea
From: "Marlon K. Schafer \(509-982-2181\)" <ooe@odessaoffice.com>
Date: Mon, 12 Mar 2012 12:08:33 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yeah, no guy wires.

It's an offroad motor bike event.
http://stumpjumpers.org/desert100/

If you watch the whole video you'll see how crowded the pit area is.

I don't think I'm even going to be able to attach to anything either.

At 1:27 you'll catch a glimps of the setup I put on my motorhome.  The only 
LOS to my main tower is up on the hill overlooking the entire camp site. 
But that system isn't reliable enough for the vendors so I'm looking at a 
dedicated point to point link from the MH to the vendor area with it's own 
small hotspot just for them.

(For those that remember this is the motorhome that we're trying to build 
into an emergency communications facility.)

marlon

----- Original Message ----- 
From: "EZ" <EZRhino@fastmovers.biz>
To: "Marlon K. Schafer (509-982-2181)" <ooe@odessaoffice.com>
Sent: Monday, March 12, 2012 10:42 AM
Subject: Re: [TowerTalk] Temp tower idea


> Are guy lines out of the question?  This sounds like our Field Day.
>
> Chris
> KF7P
>
> ----- Original Message ----- 
> From: "Marlon K. Schafer (509-982-2181)" <ooe@odessaoffice.com>
> To: <towertalk@contesting.com>
> Sent: Monday, March 12, 2012 11:36 AM
> Subject: [TowerTalk] Temp tower idea
>
>
>> Hi All,
>>
>> I've been asked to put in a wifi system for a local event that's wayyyy 
>> out
>> of town.
>>
>> We've had wifi available to people for a long time, but the vendors out
>> there are asking for a high reliability version for credit card 
>> processing
>> at the site.
>>
>> Winds often hit 30 to 50 mph out there.  Not daily but often enough that 
>> I'm
>> worried about the tower's ability to stand up in the middle of a bunch of
>> trailers and tents.
>>
>> Resources I already have on hand are:
>> 50ish foot old TV antenna crank up unit (with no base, but I could build
>> something).  I'm worried about it needing to be guy'd.
>> 6 10' sections of what I think is Rohn 45.
>>
>> What I was thinking of trying is to build a plate (how thick and how 
>> big?)
>> that I could place under the tires of a rig.  Then where the plate would
>> stick out from the tires I'd have pins that the rohn can attach to.  I
>> figure 20' up would be plenty for this.
>>
>> I've got a 65' bucket truck so standing the tower sections up would be
>> pretty easy for me.
>>
>> I'm a bit worried that even with a trailer or truck sitting on the base 
>> it
>> could blow over if it's not big enough.  But make it too big and I won't 
>> be
>> able to move it :-).
>>
>> Thoughts and ideas?
>>
>> thanks,
>> marlon
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>