I have 2 LM-470D's and had a 3rd but sold it. There was a company that
made bases for these other than Tri-ex /Tash. that was as described
using J bolts allowing leveling. It had a big plate with flags that
anchors onto the 1" long J bolts ... so it could be. My third one had
this mount and the tower definitely had the Tri-Ex name plate / tilt
over stand and all.
Pete WA2ODO
On 4/16/2012 12:51 PM, John Arthurs wrote:
> Agreed Ted...same here at K7WP...please be careful all!
>
> John
>
> On Mon, Apr 16, 2012 at 8:42 AM,<k2qmf@juno.com> wrote:
>
>> Hello All,
>> I have an Tri-Ex LM470 and as I read this thread I can't help
>> thinking that this is NOT an LM470 tower!!!
>>
>> The base is does NOT use anchor bolts in concrete!
>>
>> Please see the attached LM470 diagram and RCB-70 base fixture which, by
>> the way,
>> allows for tilting the tower....
>> Base fixture is still available new from current tower manufacturer.
>>
>> 73,
>> Ted K2QMF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|