> FYI I do grease the thrust bearing a couple times a year with
marine/wheel bearing grease since its its waterproof. The grease folks advise
don't mix greases, like lithium and moly, or wheel bearing grease. So I use
wheel bearing grease all the time.
Grease is fine for machine shop pillow block types that have Zerk
fittings on them. Do not grease Rohn bearings!
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|