Towertalk
[Top] [All Lists]

Re: [TowerTalk] How to apply lube to HDX589

To: towertalk@contesting.com, richard@karlquist.com
Subject: Re: [TowerTalk] How to apply lube to HDX589
From: K7LXC@aol.com
Date: Fri, 14 Jun 2013 15:49:53 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>  I wanted to agree with this.  The pulleys need lubing  much more
than the cable.  Also, they are much more likely to  fail.
In some cases of "cable failure", actually what happened was that
a  pulley failed and wrecked the cable.
 
    You're referring to mature crank-ups. UST uses  sealed bearings that 
are pressed into their sheaves and they have for years. I'd  be surprised if 
Tashjian wasn't using them too.
 
Cheers,
Steve     K7LXC
TOWER TECH 
UST Factory Authorized Installer
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>