Towertalk
[Top] [All Lists]

Re: [TowerTalk] How to apply lube to HDX589

To: "K7LXC@aol.com" <K7LXC@aol.com>
Subject: Re: [TowerTalk] How to apply lube to HDX589
From: Andre VanWyk <kr5dx@yahoo.com>
Date: Fri, 14 Jun 2013 14:56:38 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Sent from my iPhone

On Jun 14, 2013, at 9:56 AM, K7LXC@aol.com wrote:

> >  I had many crank up towers over  a span of 25 years and never lubed a 
> > single cable, nor had a cable snap or fail.
>  
>     Well, you don't get a ticket everytime you  speed either.

True but you should not be speeding in the first place ...
>  
> >  Having said this, I regularly inspect cables on my  towers  and replace 
> > them if required.
>  
>     By neglecting periodic lubrication, you're probably replacing cables that 
> really wouldn't have needed replacement if they'd been lubed. I'm just saying.
>  
Valid argument Steve, but in my world the cost if replacing the cables every 3 
years is much cheaper than me spending time lubricating cables on 4 crank up 
towers.

73
NJ0F
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>