Towertalk
[Top] [All Lists]

Re: [TowerTalk] Lightning protection

To: "'towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Lightning protection
From: "K1TTT" <K1TTT@ARRL.NET>
Date: Tue, 09 Jul 2013 22:30:51 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
There are literally hundreds of sources of pre-made or made to order
cables... here are just the first 3 sponsored ads on google:
http://fiberopticcables.stores.yahoo.net/index.html
http://www.fiber.com/catalog/
http://www.cablestogo.com/category/fiber

another one we have used at work:
http://www.blackbox.com/Store/Results.aspx/Cables/Fiber-Bulk-Cables/n-429483
7988


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: Art Greenberg [mailto:art@artg.tv] 
Sent: Tuesday, July 09, 2013 21:13
To: towertalk
Subject: Re: [TowerTalk] Lightning protection

On Mon, 8 Jul 2013, Steve Maki wrote:

> On 7/8/2013 6:50 PM, K8RI wrote:
>
>> I can't get rid of the wired network. wireless isn't fast enough for 
>> large file transfers and I do a lot of photography with typically 8 
>> to
>> 10 terabytes on each of 4 computers.  Unfortunately even a gigabit 
>> network is slow when talking this much data.  OTOH  I've reached the 
>> point where the computers I/O is now the limiting factor.
>
> Go optical fiber.
>
> -Steve K8LX

Steve,

Can you offer suggestions as to how to make fiber practical for a DIYer? I
would love to run fiber from my barn to the house, a run of about 100 meters
in buried ENT.

Bulk FO direct-bury cable, connectors and media converters are sort of
affordable, especially given the advantages over copper.

The problem seems to be fitting the connectors to the cable. I have not
found a source for pre-assembled direct bury cable, and I am not certain
that I would be able to pull it through the conduit anyway. Tool kits for
the purpose are way out of reach, and I have not found a rental source. I do
know a couple of folks with training and tools, but they're not interested
in just applying the connectors, and will not help me pull cable that I
sourced. Paying one of these guys for the entire installation is just plain
not affordable.

--
Art Greenberg
WA2LLN
art@artg.tv
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>