Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 25G

To: "Roger \(K8RI\) on TT" <K8RI-on-TowerTalk@tm.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn 25G
From: "Mark Robinson" <markrob@mindspring.com>
Date: Sun, 18 Aug 2013 20:05:14 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Yes they do...looks like I had wrong info.

However I imagine that you would need to install temporary guys during erection. I wouldn't fancy being on a 30 foot length of unguyed Rohn 25 tower. 30 foot of 45 swung around enough for me and I only weigh 155 pounds.

73 Mark N1UK


----- Original Message ----- From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
To: <towertalk@contesting.com>
Sent: Sunday, 18 August, 2013 7:55 PM
Subject: Re: [TowerTalk] Rohn 25G


On 8/18/2013 4:48 PM, Mark Robinson wrote:
I thought Rohn 25 should be guyed every 20 feet. If you are not using a wall bracket then I would install 3 sets of guys.

Rohn shows 2 sets of guys on a 60 footer   3/16ths EHS at 75 and  56 feet

A bit depends on the guy anchors and soil conditions, but that's their recommendation for average.

73

Roger (K8RI)



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>