Thanks Ed.
Mike NF4L
On Nov 30, 2013, at 11:13 AM, Edward <navydude1962@yahoo.com> wrote:
> It's a good tower. No limit switch. Gravity not positive pull down. Cure
> for 30 days and don't ground your rebar.
>
> For antenna mounts fabricate a cross arm and mount above second section.
> Works great.
>
> Good luck. Great tower. Have had mine for many years.
>
> Ed NI6S
>
> Sent from my iPhone
>
>> On Nov 30, 2013, at 18:38, Mike Reublin NF4L <nf4l@comcast.net> wrote:
>>
>> I plan to put up a motorized HG-70 HD, with a 4 element SteppIR and a 7
>> element M2 6M beam.
>>
>> Hy-Gain says 1 week for foundation curing, UST says 4 weeks. What's
>> realistic?
>>
>> My current guyed tower has a side-mounted G-7 and a couple of vhf verticals.
>> How best to mount those on the crank-up? I was thinking of hanging the G-7
>> upside down.
>>
>> Does this tower have latches, or is the weight on the cables when extended?
>>
>> What about limit switches or stops?
>>
>> I'd like to carry over my 80 and 160M 1/4 wave slopers. Is that too much
>> stress? What about ground continuity top to bottom?
>>
>> Does the concrete/rebar cage make a Ufer ground? Do I need ground rods in
>> addition?
>>
>> 73, Mike NF4L
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|