Towertalk
[Top] [All Lists]

Re: [TowerTalk] Effect of ground radials

To: <john@kk9a.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Effect of ground radials
From: "Marsh Stewart" <marsh@ka5m.net>
Date: Thu, 23 Jan 2014 13:32:41 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
What antenna modeling software are you using? NEC-2 used in EZNEC 5 will not
model buried radials. Radials very close to ground, as close as 6" on 160M,
can be modeled. There is an excellent chapter in the 22nd edition of the
ARRL Antenna Book on Antenna Modeling that covers this. 

Marsh, KA5M


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Thursday, January 23, 2014 11:44 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Effect of ground radials

This is the first time I got zero response on towertalk, so I will try to
rephrase my question.  We all know that having a good ground system on a
vertical reduces ground loss.  What effect, if any, do 1/4 wl buried
ground radials have on the pattern and radiation angle?  I normally model
only the vertical portion of a vertical antenna and use the average ground
setting, unless it happens to be on the beach. Can ground buried radials
be modeled?

John KK9A


---------------------------- Original Message ----------------------------
Subject: Vertical Modeling
From:    john@kk9a.com
Date:    Tue, January 21, 2014 2:41 pm
To:      towertalk@contesting.com
--------------------------------------------------------------------------

What is the proper way to model buried ground radials of a vertical antenna.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>