I'll be vacationing on a saltwater beach and will have a chance to to
set up a portable vertical antenna. Operation will probably be on 40,
30 and 20M. I have a vague recollection of reading of others'
experiences on saltwater and believe that they typically used a single
wire ground connection to the saltwater. I believe the wire had a flat
metal plate or similar attached to the saltwater end to increase both
conductive surface area and stability in the water. Does that seem
about right? I've also thought about using a galvanized bucket at the
end. Even if it only lasts for the duration of my stay, it's cheap enough.
I'd appreciate hearing of any relevant experiences or opinions.
Thanks and 73,
Joe
K2XX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|