Towertalk
[Top] [All Lists]

Re: [TowerTalk] T2X problem

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] T2X problem
From: "Larry" <lknain@nc.rr.com>
Reply-to: Larry <w6nws@arrl.net>
Date: Wed, 7 May 2014 17:55:33 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
What about terminal connections inside the rotor? Broken wires?

73, Larry  W6NWS

-----Original Message----- From: Willem Angenent via TowerTalk Sent: Wednesday, May 07, 2014 4:24 PM To: towertalk@contesting.com Subject: [TowerTalk] T2X problem
I have a T2X I took from the tower because it was not working.

I have taken it apart and have the following problem:

The brake release normal.

No turning either way even not a buzz from the motor

Indicator is not working,  no reaction when I turn the wiper by hand.

Same way happened with a different cable and or control box.



I would go for it when you say the motor is "shot" but then what about the
indicator.



Any help is appreciated.



Thanks



Regards,



Will

K6ND



73



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>