> No problems with galling or dissimilar metals.
On May 9, 2014, at 7:53 AM, Mike Reublin NF4L <nf4l@comcast.net> wrote:
> I used "big box store" stainless nuts & bolts on my Rohn 25. It was up 22
> years, and came down easily (on purpose), No problems with galling of
> dissimilar metals.
>
> A swipe of a PipeTite crayon on the threads assures it will come apart
> without a tantrum.
>
> 73, Mike NF4L
>
> On May 9, 2014, at 6:41 AM, john@kk9a.com wrote:
>
>> The threads may have already had galling from tightening. Once it starts
>> it only gets worse.
>>
>> John KK9A
>>
>>
>> To: towertalk <towertalk@contesting.com>
>> Subject: Re: [TowerTalk] ROHN TOWER BOLTS
>> From: Kim Elmore <cw_de_n5op@sbcglobal.net>
>> Date: Thu, 8 May 2014 21:04:59 -0500
>>
>> That's contrary to my experience. I've had many SS nuts and bolts gall upon
>> removal that did not gall upon application. However, it has not recurred
>> since
>> I started using anti-seize compound.
>>
>> Kim N5OP
>>
>> "People that make music together cannot be enemies, at least as long as the
>> music lasts." -- Paul Hindemith
>>
>>> On May 8, 2014, at 20:44, Steve Maki <lists@oakcom.org> wrote:
>>>
>>> Even the most inadequate lubricant (WD40), when it comes to the subject
>> of SS
>>> galling, is by my calculations and experience, exactly 99.4% better than
>> none
>>> at all.
>>>
>>> I've never had SS hardware gall during the loosening process if it was
>>> *truly* successfully tightened without any galling. And even WD40
>>> accomplishes that.
>>>
>>> -Steve K8LX
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|