Towertalk
[Top] [All Lists]

Re: [TowerTalk] Replacement crank up motor

To: Julio Peralta <jperalta4@verizon.net>
Subject: Re: [TowerTalk] Replacement crank up motor
From: Alan NV8A <nv8a@charter.net>
Date: Tue, 13 May 2014 17:11:37 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Julio:

Are you sure you can't get a local repair shop to rewind the motor or replace the capacitor or brushes (if it has the latter), or whatever it needs?

73

Alan NV8A


On 05/13/14 04:25 pm, Julio Peralta wrote:
I think I have a client with a bad crank up motor on a 55' US Tower. Has
anyone out there had to replace one of these and if so where you able to
find a suitable replacement at a place like Grainger. If you have a brand,
model or part number that would be much appreciated.



Julio, W4HY

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>