Towertalk
[Top] [All Lists]

Re: [TowerTalk] Common-mode choke

To: "'GW4BLE'" <steve.gw4ble@btconnect.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Common-mode choke
From: "Marsh Stewart" <marsh@ka5m.net>
Date: Sun, 18 May 2014 14:15:05 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
See Appendix 1 on page 46 of RFI-Ham.pdf by Jim Brown K9YC for Fair-Rite
part numbers.

www.audiosystemsgroup.com/RFI-Ham.pdf

Marsh, KA5M


-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
GW4BLE
Sent: Sunday, May 18, 2014 1:15 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Common-mode choke

Hi,

Need to make common-mode choke to give maximum impedance at 28 MHz, coax is
RG-213, but unsure of Fair-Rite part number for mix-43 toroids (order would
be to mouser, so an appropriate part number from them?).

I've read the YCC article (2006?) by W1HIS), but needed clarification. 

Any advice appreciated.

Thank you 


Steve
GW4BLE

Sent from my iPhone 5S
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>